I have a friend with a CJ5 258 with a 2100 MC carb. He was running fine but had a bad shaft bushing in the carb and purchased a new one ( rebuilt...
I wished it were that easy.. but I am in a very remote area of Mexico and parts are not available even used here or in Mexico for that matter, to...
it was number 22 here http://www.jeep4x4center.com/jeep-transmission-parts/tremec-t150.htm that was out of stock, i could not get the whole...
well, now that you mension this, that was the ONLY part Not replaced, nobody had it in stock that i could find and i was on a time crunch to have...
I was really hoping knowbody said that. i just spent 600 bucks in parts alone to rebuild this and i still have the same issue. When going into...
well.. is it backwards? Notice the grooves [IMG]
I wished i could get back all my sources, i lost everything due to a hard drive issue, and that WAS my back up,, anyway, most would be correct to...
i research my butt off on this for my T150 and D20,, now i am using 50W motor oil, but dont listen to me, my tranny is still screwed up after a...
Actually, this was during the rebuild stage so who knows where things were.. i did pull the top off yesterday while in 2nd gear and both collars...
Hmmm not sure what you are refering to: here is the inside of the tranny: [IMG]
its a T-150, and yes, I have search for months on this forum and others, This is why I did the rebuild bacause as you say, it could be many...
Skip this post!,, more issues. I did weld up a bit on them, still no joy. It just seems like it is not engaging all the way.. I dont get it......
i guess that would work too, to idea is to just make sure they don't cool to fast.. and the "shop" towel is what i would use, flame re-tard-ent.
I dont even know how to explain this.. Here is a picture to help me. I am looking for the exact messurements for a NON worn out section at the end...
yes you can, the valves will cool to fast and can warp.. DO NOT DO IT.. if you need to drive with no muffler I think the safe amount is at least...
I just did the 4.0 head swap as well, added a 2bbl and I agree.. WOW,, its awsome, I can even sratch second gear ( 258,. t-150 3 speed, and...
I have a 78 cj5 with what I think is stock power steering and have just broke the pitman arm (was welded by privious owner). Does anyone know of...
Yes, sorry i didnt get back sooner.. What I found was the plastic lift lever had a few wear notches in it. So i took it off and sanded down these...
runs like a champ, BUT when pressing the gas peddel fully while engine is OFF the metering rods seem to come up to high and out of the jet and...
You will only get what someone is willing to pay
Separate names with a comma.