Clean, cleaning and cleaning. She's ready to put back together now. [IMG] [IMG] Oil pump first. This engine is so clean with low miles, I'm not...
Pictures of the Dauntless 225 before and after cleaning. [IMG] [IMG] [IMG][IMG] [IMG] [IMG]
Welded in the motor mount towers. Look factory to you? [IMG] [IMG] [IMG] [IMG] Prepped, primed and painted! [IMG] [IMG] I also rebuilt...
US Mags arrived and mounted up a set of tires and now have a roller! [IMG] [IMG] [IMG] [IMG] I wanted to mock up the motor, transmission and...
Pulled the engine and set it aside for now. [IMG] Put the plasma cutter to work. I tried to gauge the welds off but that just made a mess so I...
Master cylinder appears well made with exception of cap gasket which tore very easy!
Took the axles and front brake lines back off and flipped the frame over to grind and remove the hot rivets. [IMG] [IMG] I very carefully cut...
Major change in plans.... So I picked up this 65' CJ6 and did a quick fix, Raptor-Line and single stage paint job. [IMG] [IMG] [IMG] [IMG]...
Brakes back together. [IMG] [IMG] Brake line kit installed. I'm not very good at the double flare..... [IMG] China at its "best" here......?...
Going back together now! [IMG] [IMG] [IMG] BendPak scissor lift. [IMG] [IMG] Cleaned, primed and painted and now ready for new brakes....
Here are a couple pictures I took. [IMG] [IMG]
Onto the axles, springs and u-bolts.... [IMG] [IMG] [IMG] Epoxy primer. [IMG] [IMG] Couple of runs but you will have to find them yourself!...
Headed outside for sandblasting and metal prep coating. [IMG] [IMG] Went with KBS system. [IMG] [IMG] [IMG] So I went with full gloss for...
I cut off the frame rot and made a filler piece with the damaged original bumper. [IMG] [IMG] [IMG] [IMG] Very happy with the fit. [IMG]...
Thank you, my dream shop. It's 32' wide and 28' deep with a 16' finished ceiling.
Okay now who can tell me what these were for? [IMG] One on each side and it looks like they were cut shorter at some point? Steps? [IMG]...
Yes, it was home restored about 5 years ago but not completely finished.
Everything is off the frame with very few broken bolts.... [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] Headed outside now for...
Moving right along. This is the second major project in my shop and I must say having space, good lights and heat makes a huge difference! [IMG]...
Nantucket Island, perfect place for this jeep!
Separate names with a comma.