The 74 Drum drum master I have both reservoirs are the same size.
Have dual master system for a 74 cj5. Drum drum on my M38A1. no proportioning valve. do i connect the front brakes to the front or he back of the...
I have an old Dana 44 tapped rear axle. want to carry a spare short axle on the trail. What would I need to replace it on the trail. I was...
Yes there is going to be a step for the snap ring. Was not sure how deep. do I leave room for the gasket.
Thank you for the reply. Like your set up. If I use fire wall peddles some day I will use a hydraulic bearing set up like that. I like seeing all...
I need to make the adapter to use the t90 bearing retainer on the t18 transmission. I do not have a t18 retainer to copy. If someone has one can...
I think i will buy a T90 input shaft to copy. I think i can figure out the bearing retainer. I will post a drawing as soon as i complete the project.
Hoping to find someone that has a technical drawing of the adaptor to mount the T90 front bearing retainer to the T18. also the drawing to machine...
I have seen this before. not able to see what the parts are. what is FF, I think GG is the bearing race, HH balls, JJ upper race. Would FF center...
Thank you for the reply. Just do not want to put the new wheel on and have to try and remove it.
This is the same as early CJ5. just looks like it needs something to center the shaft under the spring.
Looking to find out if I'm missing a part for my steering column bearing. I have the bearing cup, ball bearings, top cup, c clip, spring and then...
Separate names with a comma.