I believe. Not sure where I check voltage coming out
What is fsm
Not sure if you mean polarity setting this regulator but we did that. It’s funny tho how some of these regulators call for different ways to set...
Ok so here is the issue! Generator completely rebuilt. New regulator. When we check voltage at the battery when we have an alternator we get 14...
I did put a kit in it when I restored it but I wasn’t happy with the kit from Kaiser Willys. I tore it apart this morning and couldn’t find...
Been driving it but but not for a few weeks. Leaking on the float side. Gushing out and that’s why I thought it might be something with the float....
well today I fire up my 64 cj5 and I see fuel running out the bottom part of carb. Could this be a float stick down? Have not had trouble with...
Anyone know where to get retainer ring to hold down boot on shifter of 1964 cj5? Mine didn’t have one but my one on the transfer case shifters is...
Does anyone know where to get the metal ring that holds down the shifter boot on a 64 cj5. I have the one for the 2 transfer case shifters
7.00-15 tires
[ATTACH]
Yeah runs great. Just black soot. Haven’t checked plugs. Have to choke to start but then push it in and it will continue to run. Oil bathed Air...
Ok guys thanks. I appreciate the feedback. Engine does start to bog down and want to stall as I screw in the idle. I guess I should try it right...
Yes it is a YF carb. Looks like the float level is only adjustable by bending the arm. Not sure if fuel pump is adjustable but did put new fuel...
i have a 64 cj5 with a f134 engine and it seems to run rich. I have a ya carb I believe is original. I’m assuming that the black soot stuff at the...
You need to attach slide hammer to the threads then yank it out
Thanks
Do you know if they sell a good die wrench for the dies
Thanks for the input. I was running 10w30 in it but seemed to get black awful quick so thought I should ask about it
Can anyone tell me what we should put in an f134 hurricane for motor oil?
Separate names with a comma.