Thanks everyone. I decided I need to find help on this one. Put the steering wheel back on without the lock plate to make sure I did get any...
You are right on track. Unfortunately something is stopping the sleeve fro coming more than 1/4” out.
Thanks! I may just reinstall the wheel and do as you say. The wheel lock is stuck in the down position (may be a part of the problem?) hopefully...
The TSM is a great help in understanding what the heck I am dealing with. I suspect I have a broken rack or lock sector block tooth. Unfortunately...
Thanks I will research that one!
Hmm. I’ll have to see if I can I’d what you are talking about, hopefully no one tried to jack this rig while I was at work. We live in a good...
Yes the tilt lever has been removed. I put it back in to try a different tilt position to get the sleeve off. No go.
Yes there is. I got the key assembly out no problem. It is the linkage behind the assembly that is jammed.
Jp, thanks for that. Yes the rod that goes back to the key mechanism is not moving. I can see when I manipulate it it is trying to work the...
I tried to start the Jeep a couple weeks ago and the key would not turn. I pulled the steering wheel, lock plate, and indicator assembly off and...
Thanks for that. The first thing on my current list of things to do is drain and fill the tranny. It’s quite noisy. Yes it is very past due for...
FWIW, the title is ‘65 but I know from viewer here that it is a mix of years...
I posted a few before but you can never get enough. Not free but a deal I couldn’t pass on... [IMG] [IMG] [IMG]
James, I need to do a lot of work to figure out what I have here. It is new to me and I am still in the honeymoon phase with it.
Once I decode that I’ll have to look into them...
Tim, I get the brake issue, the brakes on this rig suck. Yes I know going to larger tires will compound that issue. The woman who gave me this...
My rig currently has 3 different tires, 4 if you count the spare. The spare is 15 12.5 35” and the rolling tires are 15 x 32’s. The gearing is...
Some great input gentlemen, thank you. When I first picked up the Jeep I went by the local parts store I have used for years. The owner and a...
Thanks for everyone’s input. I really don’t know squat at this point but I am trying to learn.
Tim, Thanks for your patience, I can be a little slow on the uptake... Here is the radiator from 2 views. I have been told the engine is a 231...
Separate names with a comma.