Hey guys, Looking for the PN number of the lower shroud for a GM bellhousing on a 69 CJ5 with Dauntless. Anybody know (or have the part)
Hey all, I cant seem to get my motor mount holes to line up. I can get one side in then, the other side doesn't seem to want to go down far...
So, this is my first rebuild so please bear with my ignorant questions. I don't recall seeing the pilot bushing when I took the tranny off the...
Hey guys, hopefully my last question regarding the dauntless oil pump. I got my new one installed but I noticed something interesting. The...
Hey all, I am installing a new (used) oil pump on my dauntless. I bought the oil booster plate kit for it from TA performance. I mocked it up...
Hello, My used dauntless oil pump arrived. I soaked it in carb cleaner overnight and tore into it. I think the plunger for the relief valve is...
So... Assembling my engine that is now back from the machine shop... The timing cover was tanked and machined. I go to test fit and there is a...
Questions... I have two sets of dauntless valve covers: -The set that I am using in my build, features one that has the oil filler cap and a...
Anyone got a recommendation on one? Thanks!
Hey all, I am trying to find the crankshaft packing and oil shedder, at least that is what it is called in the service manual... Number 18 & 19...
...connects to the reverse light switch on the T14 tranny? I installed a new switch and it has the weird two little nubbin type posts. Do I just...
So I think I am going with the pertronix conversion on my dauntless build. I think I want to upgrade to a Mallory or MSD igntion. Has anyone...
I ordered the OMIX-ADA part no. 18804.02 for my T14. I noticed that it only has the solid top seal, there is a pic here for reference:...
Anyone here running the Offy 4bbl intake and an HEI distributor? Did it fit without modifying anything?
Hey guys, New to doing any sort of body work / patch panels. My rebuilt Dauntless is just about to come home from the machine shop and I need to...
Ok, so I know this subject has been beaten to death, but hopefully my question has a simple answer. I've gone through some prior posts and...
Hey all, I am trying to get some high quality replacement U joints for my front axle. I am looking at the Moog 378, 365, or 361... I think they...
Hey guys, Just about done redoing my fuel tank / fuel system. The PO did some weird stuff with the fuel system so I have no reference.. What are...
Hey all, Got myself a seal kit and am re-sealing my transfer case. I noticed on the shift lever seals and the output shaft seal there seemed to...
Hey all, In the process of giving my abused Dana 18 some TLC. I noticed that when I pulled it apart, the the speedo drive gear has no teeth on...
Separate names with a comma.