Finally got a spare minute to give an update. When I bought my rebuild kit from Mike's, the accelerator pump in the kit was just slightly shorter...
Got it fixed! In a hurry now but I'll update you on the fix later. Thanks everyone!!!
I keep trying to focus on what could have changed when I did the seafoam treatment through the pcv and then running it hard. It ran almost perfect...
I removed and soaked it in cleaner during the rebuild. Is there a test procedure for it? I just made sure the pin moved.
Thank you for the help. I did adjust idle mixture but it didn't help. I tried every setting from 1 turn out to 4 turns out and it doesn't make a...
It is working... see #2 above.
I have a 67 that I bought about a year ago with a 225 V6 and 2G carb that is bogging down when I give it much gas. It will die if I keep the...
I did notice that and plugged the manifold side until I get the vacuum line on but that still wouldn't explain why it will only idle with high...
Sorry for the lack of info. I just bought it and was told everything is original. I've been driving it but of course it is low on power and misses...
my 67 sputters and backfires so I suspected a timing issue. When I tried to set the timing to 5 degrees it would stall out. It only has a decent...
Wow, very generous of you! I'm sure shipping will be expensive but it would be worth it to me. I'll send you a PM with my address.
Ahhhh wondered what that hinge was for... after I realized the soft doors go in a hole in the door jam
The original wheels that came with my 67 have some corrosion around the holes where the tire plug goes. I'm wondering if they'll leak air around...
My 67 has four clean holes under the driver's side "Jeep" logo. Anybody know what was mounted there, assuming it was a common thing? 67 left...
Yes, it does have the snorkel cutout but the hood has been replaced at some time. Great info about the seats and tail lights... didn't know that!
How can you tell it had a Meyer cab on it? Funny you say that about the year... the ad said 1968 but they told me it was a 67 when I got there and...
Wow, I'm overwhelmed at all the nice greetings and great information. Thanks everyone!
Separate names with a comma.