That looks like a match on the rack. Thanks for following up.
That sounds right as it was attached with well nuts and even had one of the plastic boots to protect the top from rack "Feet". I don't imagine...
Thanks Timgr - that's it. I traded a 1978 Chevy pick up to a friend and he and his boys are prepping my CJ for paint in exchange. We'll see if we...
Thanks for posting this - I've been lifting the hood for a year to set the choke on my 66. Hopefully this is the fix.
I picked up a hardtop for my CJ5 a couple of weeks ago and it has an official looking Jeep emblem on it, though it looks like a Meyers from the...
Mike's carbuertor parts is a good source for that Rochester and he has videos if you havent' rebuilt a cab in awhile: Welcome to Mike's Carburetor...
I've got a 66 with Powr-lok front and rear that I bought as a project. Dana 44 rear had a twist in the splines at the differential on the...
Focker - thanks for the pic - I'd seen this on a previous research I'd done and I'll use it as the pattern to make mine from. Main thing is to...
I'm looking for a pair the plug bars for my 66 dauntless. Considering making some out of some common steel. any thoughts
MAN - You guys are a wealth of info! Thanks so much. At this point, given all the complexities of making the swap, I'll probably rebuild the...
Hmmm - I'll keep that in mind when I do the trans. Tcase work. I can see that my engine is not paralell to the fire wall by comparing the rear of...
I pulled my v6 out of my 66 cj5 to replace the freeze plugs and upon installation I find that the engine and trans have been installed un-square....
I've got a 66 with the Dauntless and a T90 that needs rebuilding but I'm leaning towards the 4 speed swap. Will the Ford T18 drop right in with...
Separate names with a comma.