I’ll probably use adele clamps. I’d like to make it look as original as possible but have made a lot of compromises on the jeep over the years and...
The channel bracket must bolt to the front cross member (10.470-8) [ATTACH]
Thanks Tim. That seems like the logical way to do it. Lot’s of pictures of the passenger side pump installation but only from the top of the...
I have gathered most of the hard to find parts for the passenger side pump setup for the 1973 232 conversion and studied several years worth of...
If you reach a point where you”re considering an engine overhaul, I highly recommend Andy at D&A machine in Canton GA. He rebuilt my 232 a couple...
Another possible source: Western Motors Service Co.
Price went up recently on amazon .. was around $26 Amazon.com: Sta-Lube SL24239 API/GL-4 Multi-Purpose Hypoid Gear Oil - 1 gal: Automotive
Edit - I put the top bracket on backwards when assembling for pics. Need more coffee;)
[ATTACH] [ATTACH] [ATTACH] Thanks Tim, heres what Ive gathered so far. I know hoses will have to be lengthened and a lower bracket will need to...
Thanks, I started gathering parts nearly a year ago and have the necessary passenger side pump brackets, but now Im starting to rethink things....
Do I need it? I took my CJ off road in north Georgia over the weekend and was surprised that it went fairly well with manual steering. Definitely...
[ATTACH]
All credit goes to Andy at D&A machine in Canton GA. He could have pushed up the HP and torque much higher but worked with me to build what I...
Thanks everyone. At some point I may change to electronic ignition and go to a 2 barrel carb or tbi, but only if reliability becomes an issue. So...
[ATTACH] I had my 232 professionally rebuilt over the winter and thought I'd post the dyno results for those who might be interested. My goal was...
I have no experience with SOA, but I think it will be similar to SUA shim installation. The shim needs to be secured by the spring center pin and...
Well it looks like BDS came through, received this email today: Hello Scott, Thank you for the photos. These springs definitely do not live up...
Well even after loosening the clamps and center pin, I haven't been able to line them up. It appears that both spring sets have one laterally...
Hammering and clamping doesn't seem to work. They spring right back. Guess I should try loosening the clamps and center bolt.
Just received these today to replace the extremely stiff rough country springs the PO had installed. I'm not too happy with the alignment of the...
Separate names with a comma.