[IMG]
So my dauntless has headers,that go directly to little thrush style mufflers. That's it. It's loud. What is out there that is small like those but...
Thanks guys. Figured I could!
One stupid question.....can I replace the seal with the case still in the jeep. I am pretty sure I can just making sure. Looks like 4 bolts for...
So I pulled the fill plug just to see if it needed a top off! Oil poured out. Guess she may have been a touch overfilled!!!!
Guess I have to get under and look. I did not do it. Seals are cheap enough I can do it again. Give me a quick rundown of what I should do and...
i replaced the rear main seal in my transfer case and now it leaks worse than before. Any thoughts or suggestions?
Well...she drove home fine. Some mild tweeting and adjustments needed but I think we are good to go. Again...thanks to all who helped through this...
And....we have a clutch again. Put the factory style bearing in. Had to put a spacer on the pivot stud to give us more room for the fork to move....
Go down the my thread called "clutch". Start reading!!!! It's about five down.
It doesn't come with any connectors to the pedal. We ended up using one from an Alfa Rameo. LOL
Here it is- 835260676-0750. Let me know if that worked
I don't but.....it's the height volume all in one unit. Around 60 bucks. And it works great.
Basically it looks like the threaded part spun itself off. I didn't install it so I don't know if the roll pins were in all the way or not. I'm...
Well.....my really expensive NOVAK TB decided to destroy itself and come apart. Guess the tranny needs to come apart again. Gosh Darnit. I'm at my...
Just drove the jeep home. So far so good. One added bonus....she doesn't stall or want to die anymore when I brake or stop. I'm thinking now the...
She moves on her own power!!!! Just need to nut and bolt everything and make sure all is tight and good. Guess I'll be picking up Lil Man at...
And.....we have a clutch. 1" bore Wilwood master worked perfectly! Buttoning everything up and should be back on the road by mid Friday!!!
I ordered a Wilwood master today. Will be in tomorrow. Hopefully I have a positive update sometime Monday. Wish me luck!!! Thanks guys,I mean that!
Warlock...what size MC and slave do you have? My slave is a 7/8 bore. My mount is the same as yours and I can mount it just like yours. Just...
Separate names with a comma.