Thank you for the positive comments, I learned mostly from my Dad. Have heard of OD NP-542's, mine is not. Am glad I swapped out the...
Well, I finally pieced it together enough to take her to 4th grade, and then it rained. Have since driven her to school, she is not that...
Think I would disconnect the cables from the starter, put the nuts back on to protect the threads and use jumper cables from a 12 volt battery to...
Asked the same question of my local inspection station and didn't get a clear answer. A motorcycle in Missouri has a direct reading inspection...
Found this picture of what mine probably looked like in Government service. Been a long while since I have seen one like it. [IMG]
Which made them easy to steal. Our auto shop teacher was an Army mechanic, he said it was common to switch two plug wires or remove the rotor so...
I believe so, if you look at the first few pictures you can see the line on the cowl where I popped the spot welds loose to free the top. Thinking...
I have to disagree that taking the roof off is too hard, at least on a 1969 DJ5. You might check out my Build Thread for mine...
Re: strapping items to the hood? Will you be 4 wheeling on the trip? If not, it looks like the tent cot would fit under the...
My Dad tells the story of his Dad, with cars back in the 40's shoveling hot coals from the woodstove onto the crossmember. If he knew it needed to...
Glad you got out without further trama. I would never skip a chance to have a gusset, or two. That is why my stuff is always too heavy.
Couldn't agree with nickmil more on this. I have a NP542 5-speed, with a flywheel out of a school bus, behind my 153. The clutch disc is larger...
Well the 5.5 wide JEEP wheels with 215-75R-15 tires rubbed on the springs and the body. Cut the C-channel axle in the center and redrilled the...
I do not know if there will be an interference where the two inboard mounts converge. I do know that Chrysler cars mounted their rear leaf springs...
A fine find indeed! I would be leery of a "fixed" fan, even in a low rpm application. Hopefully you can find a straight replacement.
I was getting ready to pull the trigger on the Fulton 2" coupler above. Quite pleased to have found this one on eBay....
Well, after seeing David Bradley trailers with the roadster fenders here over three years ago, I finally got mine. It was in an ad on Craigslist...
Well, the front shock lower mounts I made were not quite in the right place, caused the shocks to sit at an angle. Also thought that given the...
Electric fuel pump is safer than filling the carb vent with gasoline from a shampoo bottle (which also works).
I bought a set of these (235-75R-15) for the wife's Cherokee seven years ago for winter tires. http://www.greendiamondtire.com/ They were...
Separate names with a comma.