https://www.facebook.com/marketplace/item/1104590654281993/?ref=browse_tab&referral_code=marketplace_general&referral_story_type=general&tracking=%...
So I'm putting together my old Spartan turn signal (1972 CJ5). It was taken apart years ago but I've seen enough pics to know how to reassemble...
I put Scout axles under my 72 and now have disc on the front and drum in the rear. I'm looking at master cylinders and boosters. I'm thinking of...
I know this issue has been discussed a lot. After reading many posts on this site, I think my situation is unique. Keep in mind, nothing is...
One of the problems with leaving a project for too long is identifying parts. This bracket was with my Dana 20 transfer case (which mounts to a...
I'm looking at some re-gearing options. One thing I'm noticing is that ring and pinion sets for JK and TJ Jeeps do not cross reference as fitting...
I'm going to bigger tires (33s probably) from the stock size on there now. So, I want to go up in gears to 4.10 or 4.56 Currently, I'm running...
So, I was rebuilding my Dana 20 transfer case. I used two different sites for information as I tore it down and put it back together. One (if not...
My gas tank is rusted and leaking (although the sender works great). I've heard a lot of bad stuff about the Omix-Ada tanks. A nearby Summit has a...
I love the color of the Martin Senour (Napa) Cast Iron 7250 rattle can paint. Anyone have any insight as to whether or not this stuff will work on...
So I am rebuilding the '78 IH locking hubs that came with the D44 axles I put under my CJ5. Both were caked in dirt, grease and all sort of junk....
On my '72 cj5, I'm replacing the ball joints. Although the upper ball joint looks like it is seated all the way in, the snap ring will not go on....
I outboarded my frame in the front ('72 CJ-5) and put Dana 44s from a 1978 Scout underneath. From all that I've read, including the info I...
So I bought an old set of Scout Dana 44s to go on my '72 CJ5. I adjusted the caster, moved the rear spring perches and outboarded the front spring...
I cut and reset the yokes on my Scout front axle to add caster. Now, I need someone to weld the axle tubes back to the yokes before I can stick it...
Some people spend hours, if not days, on electrolysis. Others spend much time or big bucks on sand blasting. I've found another option. Have...
Separate names with a comma.