Scored a rear 44 one piece narrow axle. Out of a 75 cherokee. 6 lug. Front 44 also. Got both axles and aluminum rims driveshafts shocks and shock...
Wiring my 2a and trying to figure out how the after market turn signal harness works. I see the in jegs and such but there like 122 bucks. Looks...
Got the flatty to start and run on the pro-jection system. It has a 231of. Two quick questions. First, cylinders 4,5,6 the headers glow bright red...
Anyone have a pic of an oddfire hei installed? Also could you label which wire is #1. thanks
I have a two piece dana 44...not sure what year...the po put the drums on behind the axle flange and put the lug studs throught them. I know this...
Found a amc 360 thats has power steering mounts and a mount for a york compressor on it. Looks like the same 3 bolt mounting as the 225 v6. Could...
What im thinking about is i have 2 dana 30's. One is just a housing and brakes but its a 77 which is the large brakes and 6 bolt caliper mount....
Got the projection with the ecu made by MSD. Looks like it wont sell so im gonna see if it works. The wire colors so far match the newer version....
Just bought this on ebay. Hope it will work. Havnt ssen one with that big of ecu...anyone know what model it is? Thanks
Im putting an offenhauser 4bl manifold on my 75-76 231 of engine. First question is does the valley pan need to be there or can i get rid of it....
Will the luk 01-029 work for this application? Im sure the 10 spline 1 1/8" disk is fine....worried about throwout bearing. Thanks
I was wondering if the 225 shares any bolt patterns on the front with any v8's. Thinking it shared the assembly line with some other buick v8's...
Was thinking it would be fun and different, but the bellhousing on them is wierd. Would it work with any sort of somewhat modern tranny like t-18?...
Have a 2a that i swaped a 231 oddfire in and i got a aluminum radiator from speedway motors. It doesnt have any mounting points on it. Would it be...
Was wondering if anyone has used an aluminum radiator in thier 2a with a 225 v6? If so who did you use? I took the headlight buckets out for more...
Im trying to find poly bushings for the rancho lift springs on my 2a. All i can find are for 55 and newer. I thought the springs were the same...
Anyone know of a good site with details on rebuilding a warn overdrive? Putting mine back together and want it to be right the first time. I have...
I know its a heater but have no idea where it comes from. Got it out of old '5 i bought and ended up parting out. Didnt know if it was a stock...
I picked up a warn overdrive that's in good shape but there's some rust on the bowl gear teeth .What is the best way to get the rust out of the...
Managed to pick up a t98 with a d18 and a warn overdrive on it tonight for 200 bucks.....wondering what i can get out of the t98. Ive read some...
Separate names with a comma.