Has anyone successfully used a reproduction speedometer head for a 67? If so, what brand is it and/or where did you get it? I bought one that...
[ATTACH] I was looking for a correct speedo head for my '67 CJ5 that has the single digits. None of, the repro units has the correct appearance....
[ATTACH] [ATTACH] I wanted a Tux Park bumper for the front of my Jeep or a reasonable facsimile thereof. I decided to use a '40 Ford bumper that...
I've never had a CJ5 before and just recently gotten mine (1967 V6 with stock linkage) in drivable condition after a year of resurrection...
On my '67 CJ5, were the side steps an option? If not, what goes in the holes in the floor? Thanks!
Resurrecting my '67 CJ5. Rebuilt the entire front suspension including new bearings in the bottom end of the bellcrank. Put everything together...
Anyone know where I can get a new set of bushings to mount my grille on a '67 CJ5? Thanks in advance.
This is my first Jeep. As it says in my signature, it was "rode hard and put away wet", which includes a veritable cornucopia of failed repairs....
Is there a bolt-in tilt steering column available for a stock CJ5 with Ross steering box? Thanks.
Well I've succeeded in ruining the first pair of seals I bought. I had already surmised that my big socket was too tall to effectively hit it...
Will a D30 pinion yoke fit a D27 housing? Background: want to upgrade '67 CJ5 with v6 from 1100 series ujoint in front to 1310. My pinion gear...
[ATTACH] I think I know the answer but does the front shackle look right? I think the repro springs I bought are too long.
I'm going to remove the hard top from my CJ. I plan to use a bikini top for the summer. I'd like to find something to cut down on the buffeting...
Working on my '67 CJ6 V6 in my signature. I did a search on "Dana 27 driveshaft" and read a bunch about the different size ujoints for the V6....
My '67 CJ5 didn't have any front axle seals on the Dana 27 when I tore it down - leaked all the axle lube all over the brakes. I obtained new...
My question of the day is do drag links wear out? How do you know when it needs to be replaced? I was going to use a rebuild kit on mine but...
Does the slip yoke on rear driveshaft attach to the transfer case or pinion yoke? My '67 CJ5 didn't have any front axle seals on the Dana 27 when...
I'm doing a bunch of work on my Jeep. I've now discovered that almost all the body bolts are loose and the mounts are shot and missing in a few...
Should the driveshaft flanges, on the front and rear of the transfer case, be phased or clocked the same way? Thanks!
My transmission and transfer case mounts are shot or nonexistent. I ordered new parts and took it apart. After looking through my resources with...
Separate names with a comma.