That is one sweet ride. (y)
Just one man’s opinion...Sell the parts and use the profit to buy a nicer candidate. You will be so far upside down in that thing you’ll be...
From the pages above, what are “Front Bumper Bar Weights”?
Looks like it has an upgraded steering box to Saginaw. It has headers and dual exhaust. I didn’t see a vacuum hose to the distributor. It’s a...
[ATTACH] Here’s a normal looking eccentric for comparison.
For what it’s worth about 1 wire alternators... Catalog
For about $50 you can get a Delco 10SI at your local auto parts. It’s pretty easy to convert the wiring. Just need to feed the main harness and an...
With those shackles on the front it rotates the axle around where you probably get negative caster. If there’s any play in the steering...
I’d center the bell crank first. It should be perpendicular to tie rods and parallel to the length of the frame. Then pop off the drag link at...
X4 or whatever number we’re up to.
The head I’m referring to is just the speedometer. I’m referring to the assembly or cluster to include the othe gauges, housing, lenses and case.
I don’t know which one I bought. It was on eBay a while ago. After I bought it and looked at replacing it, seemed to be too much work. So I...
Has anyone successfully used a reproduction speedometer head for a 67? If so, what brand is it and/or where did you get it? I bought one that...
Yeah, [sarcasm=on]thanks a lot Photobucket![sarcasm=off]
Ha ha...I didn't even know they were supposed to self-cancel.
As said above don't use anything to clean the inside because it will remove critical lubrication and residue may be left behind which could cause...
For a top-mounted return line, it should work fine. The repro tank I bought had the wrong size bung on the bottom for the fuel outlet. I had...
[ATTACH] Welded.
That's what I did. You can get weldable bungs from McMaster Carr.
I did a 10SI conversion (GM internally regulated Delcotron) on my CJ5 and it all worked great. Later, my speedometer head blew up and I replaced...
Separate names with a comma.