Friend of mine is working on a 47 cj2a. The horn is MIA. He's gonna run a 12 volt system, but don't think it really matters. Anybody got one you...
Looking for 11 in backing plates for the rear D44 for my 3B project? What y'all got?
I am very slowly getting started on the winter project with my 3B. My plans are to change the T15 trans out for a T18 wide ratio. I have got the...
Of course it's not mine. I saw this one on the way home from work. [IMG] [IMG] [IMG] [IMG] Nobody answered the door so I didn't open the hood or...
Need a set of these for a disc brake axle, I thought I had a set of these but they are for a drum brake axle. Anybody got some you can do without?
I'm working on a D30 for my 73. I want the E locker, and new 3.73's (on hand) and of course disc brakes. I have disassembled the 3.54 gears and...
I'm still using the floor pedals in my cj3b. I dont have any plans to change them. I just recently realized that I have no brake lights, again....
Help, Looks like I have made a mistake. Surely there's some kind of fix. I am building a d20 tcase for my 73 using Tera Low gearing. All good...
I really wanted to be working on this, [IMG] D20 Tera Low gearset for my 73 cj5. Which pill is it I should remove for 2wd low?? A loud pop and...
I just finished my power steering project on this one, and wanted to check a few other things while I had the chance. This is the 73 with a Qjet...
I'm goin to look at a transmission tomorrow with intent of putting it in the green B. Of course I hope to look inside, and my question is, Is...
I happen to have this diff on hand and wondering if it will fit my 73 with a D44. [ATTACH] C30761 [IMG] 23181X 12 15 63 B [ATTACH] It is a 19...
Did Willys ever put a venting windshield on a CJ3B. Fellow I work with is working on a 2A and it had this on it. He bought a new tub kit with a...
Sorry if I'm taking a shortcut on this, without searching. How much is involved in putting a T98 behind a 231ef?? Maybe input shaft? Is it even...
Has anyone used the TA adjustable timing set Performance & Double Row Timing Sets, 350 DOUBLE ROLLER TIMING SET, TA_1521B | TAPerformance.com on...
Need a little help. Would this oil pan fit my 225 Dauntless. I see the years in the description, but I'm hoping cause I stripped the pan and...
I drove my 73 cj5 today to put in my labor for the day. I noticed a fairly severe miss in the 360. When I got home, I pulled the plugs to take a...
Looking for a little advice here. I'm working on my cj6 with a 225of, 9:1compression, 252 Comp cam, 470 TA. What plugs would you guys recommend...
Is this normal to only get oil out of the front rocker stand for a 225 Dauntless? Both sides are this way. [IMG] I'm barely turning the drill at...
About to bolt the heads on my 225. What kind of thread sealant are you guys using? Any help appreciated
Separate names with a comma.