[ATTACH] I need advice on what to do next. First off here's where I'm at, 1974 CJ 6. I just replaced the upper and lower ball joints, new wheel...
I lost my fuel and temp gauge a while back. Now in looking up at the back side of the dash panel with a mirror, I notice a green wire coming off...
Last summer I tore apart a donor dana 30 in order to begin educating myself on these things, but I didn't it without any of the proper tools. I've...
When I get my '74 cj6 on the asphalt, it's an art to keep it steady on the road. Allot of slop and sluggish response. I realize I didn't buy an...
A couple months ago I had my fan lying on the ground as I was preparing to begin wire brushing it in order to paint it. I noticed how the blades...
I need to see a pic or find the part to move my alternator over to the other side of the engine. I'm going to want to add power steering later...
It feels like I have some play in my coupler. When I turn my wheel from side to side with it parked in the garage I can hear the play in the...
I'm looking at that hump right where the top meets the window. Looks like some added head room. Anyone know who makes a top like this? Looks like...
This old jeep is just full of surprises! I had to replace the heater core this weekend and surprise, surprise. For any of you guys that are...
After seeing Kirk's jeep with a few scuffs from rolling over I figure I need to do something until I can get the tools to build a cage. I...
... would this particular tool do the job for setting up my front dana 30 and rear dana 44?...
Well it ain't a jeep pic, but it something I'm going to put to good use working on my jeep! Took some time off of working on the jeep and found a...
What are you guys using to create a flange on your panels. I need to patch some floor and I want to put a 1" lip on two sides for spot welds. Not...
Just wondering if any of you guys are interested in maybe going in together on a good quality pipe bender and some dies. I'm needing to build a...
Anyone here ever watched this video? If so, what did you think of it? http://smartflix.com/store/video/1356/Differential-Rebuilding I'm...
My conundrum is based off of trying to keep this old sixer as close to original as possible, but at the same time, I realize there's a reason they...
After looking at my Chilton's book and looking at the steering box, I'm not quite sure I have the factory steering box. Maybe I'm just looking at...
Ever take something off your jeep and wonder how in the hell it made it that far? This was one of those things on my list that I finally got...
Just curious, I've noticed the preferred tool is the jd benders for building roll cages, but I was wondering if a tool like this could be used?...
Working on building my rear bumper and started looking at the rear cross-member which looks to me to be a bit weak for a piece of iron that is to...
Separate names with a comma.