Well, I had to cut about a 1/4" off the threads, and the push rod fit beautifully. Pedal comes up to within an 1/8" of the floor board, and...
Nothing yet on the brakes. My assumption that disc brakes were adjustable seems incorrect from Googling around. I'm going to have to jack it up,...
Here's some updated pictures: Jeep [IMG] Muffler [IMG] Mag [IMG]
Pulled the snap ring on the push rod, and the brakes released much better. They still rub a little, but I'm thinking some adjustment at the pads...
MC plumbed, and decided to get new mufflers while I had it out. If you have a residual valve issue, does it take time for your pedal to rise back...
x2
Stopped whining, and started workin' :) Decided to forego the power steering for now. Got Herm's replacement MC installed. Fits great! I opted...
I used a Centech model GV16J wiring kit. The only reason was that I got it for cheap from another member on ECJ5. Good kit...nothing...
Warloch, It looks likr Jegs has a good price on a starter kit here...
That's a perfect kit! I didn't even know they made that. I figured on an indivudual connector for each wire. I like this better. Thank you.
I agree whole-heartedly Chuck. Plugs are necessary, and I should have just made them a part of the wiring project. I do plan to go back and...
I bought a dual MC from Herm too. I went with Herm because I switched out my drums for discs on all four hubs; and, wanted an MC that was already...
Those were a Craigslist find, out of Montana, about 3 or 4 years ago. They were tough to find!
Late night update. MC is bench bled...feels/looks like everything is in working order. Before I mounted it back under the Jeep, I wanted to test...
OK...no...really this time guys. Taking advantage of the long weekend, and taking all next week off. Forgoing the power steering (even though I...
This is what I figured out for my 70 CJ5's 7-wire signal: Blue = Brake Switch Black = Power From Fuse Box Orange = Passenger Front Red =...
Here is a link to my wiring thread for my 70. Hopefully it helps you a bit....
I had a bolt on my tie rod that would catch on only one of my front shocks. Also, check the adjustment screw on the steering box, and make sure...
Ugh. I'm doing this with the body on, so it's already a PITA. I disconnected all the brake lines, and got through all the bolts on the master...
I called Herm...he's already got me covered :) 2 lbs residuals are already in the master cylinder, no need for external ones. Guess I'm ready to...
Separate names with a comma.