Trying to contact you about the windshield..... you can reach me at 757-724-8657
What are you doing here.....LOL
Forgot to mention I have checked all grounds with a test light. My next step I think will be to take the dash apart (again) and test the gauges...
The cause is due to the jeep being heavier on the driver side. When I put the new springs on I noticed that they were compressed about an inch...
I have spent several days learning about the gauges on my CJ6. However after replacing both and getting to work great after figuring out ground...
I have a 1965 CJ6a Tuxedo Park and was able to get a set of factory spec leaf Springs from Walks 4x4. Limestreet Carriage had him make a set a...
I agree and that is what i am going to do...thanks Walt you have been great
Thanks I should have looked deeper in the archives thanks for all the input it has really help me alot
I thought about an engine swap but this jeep is almost all original and they only made 459 CJ6a
Thank you I have 4.27 gears and right now my top end is 50 mph I would like to get up to the speed limit for trips to the otterbanks
Check top where the tower is connected make sure the oil is not coming from there as it only happens after running if they did not put the shift...
Thinking about installing an overdrive unit in my 1965 CJ6 with the F134 engine any thoughts on what this might accomplish for me. I am...
I have a 1965 CJ6 and the brake pedal rubs on the body as it goes through the floor I was told new bushings would solve this problem however after...
Richard Darr 306-513-9824 Great guy to deal with really good at hard to find parts for older rigs....
There is a guy in Washington state that has around 30 or 40 jeeps he almost always has what I need him name is Richard Darr 360-513-9824. Got...
I got a T90 Side shift from Herm, should be here in about 7 to 10 days. Thanks to everyone for helping, if not for you guys I would not be this...
Thanks Daryl, just ordered one from Herm really nice guy he really seems to know what he is doing. Should have it in about 7 to 10....
http://hermtheoverdriveguy.com/?page_id=1329 might have what I need on his sight is a rebuilt side shift ready to go. I would ask if what he...
Sorry having problems uploading a pic of this...will try again [IMG][/URL][/IMG]
Ok got everything apart and it appears that the fork that shift between 1 and R is broke off. I think it is deep in the tranny but wont know till...
Separate names with a comma.