Anyone have tips / suggestions / comments on sandblasting a tub for a cj6?
I am ready to work on the tub of a 1974 cj6 to finish my jeep. I picked the jeep up almost 15 years ago and tore it apart. Three years ago, I...
2002 7.3 diesel, 2WD, supercab, dually, 282,000 miles daily driver I was not getting oil to feed the HPOP (high pressure oil pump). Either the...
I have to replace the alt that came with the jeep, has blades behind the pulley that won't let it fit on the stock 1974 alt bracket. Alt mount at...
When my (258) engine cranks, I see it wobble. I removed the pulley and cranked the engine. I don't see a wobble in the harmonic balancer. I...
After 11 years or so I finally had the engine running. I removed the carb to clean it out because it sat all those years. I rebuilt it 11 years...
Saturday I finally started and ran the engine after sitting over 11 years. I need to find a seal for the dipstick tube where it inserts in the...
74 cj6 with a 258 Does anyone have pictures of how the fuel line and return lines are routed from the tank to the pump? Do the lines mount on...
I picked up a different alt. bracket. My alt. fit in the bracket nicely. Searching further, I learned from the ID # (508A12) the engine is a 72....
i have 508A12 on my engine boss. I see the engine is a 258. I don't know what year the first digit "5" is for. I have the service manual for 1974.
13 years ago I took this apart and I can't figure out how to mount the alternator. Pictures I have seen show the alternator on the passenger side....
I have searched info reagarding the in-line fuel filter from the pump to carb on a 1974 6cyl 258. It is either two port or three port. What is...
I am not looking at making everything original equipment. I am ready to start running fuel lines from the tank to the carb. I have a CJ6 with a...
DOes anyone see a problem if I don't have a screen for the fuel pickup inside the gas tank? I was thinking of a good inline filter outside the...
I have a 1974 CJ with a 4.2 The parts book shows ( 5.123-2) [ATTACH] [ATTACH] part# 317 8359 washers on the clutch fork pins that hold the...
My front seal leaks. There is a groove around the circumference of the shaft where the seal is positioned. I had looked into installing a speedi...
I don't have the body on my frame. Therefore I do not have a reference for how high the gas tank sits above the frame. I have seen pictures...
What kind of lube is recommended for the parking brake cables? Something has to be able to keep them from rusting and seizing up.
One flywheel bolt on my 258, 1/2-20 x 7/8", stripped the threads in the crank. If I drill and tap for the next size bolt, would that be 14mm x...
Today I was tightening the flywheel mounting bolts to the crank. One of them stripped the threads in the crank. The motor is a 258. Can I helicoil...
Separate names with a comma.