Is the napa ProSelect filter #21258 ok to use with the Rotella-t 15w-40 for my 67- 225 Dauntless?
Nice, yeah let me know how the inserts work for you! How do you like your Saginaw 4 speed, any issues? I have yet to open mine up and go through...
Yes we put in 6degree caster shims and it no longer hits the springs . I still want to do the tierod flip but we need one more bushing and yes we...
i will get a photo tomorrow for you after work when i get to the shop.. But yes strange to me as well but it worked.. We took it out on the maiden...
Goodmorning Nickmil! Well I am back to asking questions hope you dont mind.. so deathwobble, I am pretty sure I have read every post on this site...
So our death wobble issue.. shackles were put back to almost stock.. we strongly believe it is the tires being out of balance and the wear pattern...
Ok well just found out the hard way.. those shackles in the photo.. way to big!! DEATH WOBBLE.. we ended up making all new shackles yesterday...
Skyjacker soft ride 2.5" lift, curry johny joints on shackles we made, they are about 2" longer than stock.. But the frame got lengthened 6" ...
Well as you all know putting the "jewelry" on is pretty fun.. I can't say thank you enough to Justin Banister at Banister Iron Works for making...
Latest update.. coming down to the final stretch on the chopped up cj5 (I know the purest's probably are not pleased). But the build is getting...
Being this build will be almost all for rock crawling and off road use we wanted to get a bit more articulation which we did accomplish, she has...
We got most of the sheet metal finished and had to get some primer on the open metal.. rust sux! So I sanded for about 10 hours and cleaned the...
With that said then it is time to break out the angle finder! haha.. I appreciate the help and hope that this is the fix I am looking for. I...
I was thinking that as well haha.. but somebody had mentioned that would not fix my issue.. excuse me for my ignorance and I have read this before...
Thank you Tarry99. I did the Saginaw power steering conversion with the box mounted in right behind my bumper in front of the grill. The PO had a...
Correct. this photo would be looking a from the bottom (ground) to the top correct? so when I "flip" to the top side of the single hole knuckle...
Hi GrannySCJ ! so I purchased the Goferit bushings as well.. I understand you drill the knuckle hole out and insert the bushing and tac-weld in.....
Congrats!! looking forward to that day as well.. nice work!
So we did make some progress on Sunday.. we went 9 for 9 on the sheet metal panels which is pretty darn rare for this build, there is usually one...
Here it is.. Saginaw power steering box mount (4 bolt)..wasnt too bad, reinforced the outside of the frame with 1/4" plate, used the fire wrench...
Separate names with a comma.