Friend of mine has one (his is marked 8275, but a quick google search tells me they are the same thing basically) It's just an 8274 without a...
Lots of 258s out there with low pressure, but like Tim said, they will clatter if that is the case. As easy as a 258 oil pressure port is to get...
Soooo a friend observed that I may be making my life way harder than it needs to be. For reference, anyone want to pull a measurement from the...
'79 and earlier uses flare fittings and '80 later uses O-Ring. That is both CJs and FSJ as far as I know (I know it on CJs). However what I've...
I bought a Spectra from RockAuto. It is age appropriate with the bigger filler neck. I would second having a second set of hands or a tranny...
Thanks, That is what I wanted to read.
Exxxxcellllent. That is what I was looking for. I understand you were deep into modification territory, but did you leave the pedal bracket in...
There are a few 3Bs in the group I wheel with, all with the bus steering wheel, and I don't have any comfort issues driving those. Although I am...
Does your a1 have the bracket underneath that supports the hanging pedals? I know a stock M38a1 would not have hanging pedals, but I don't know...
Let me re-phrase. did you tweak the angle in the dash bracket up essentially moving the hole in the floor "down" where the column goes through...
Thanks. So what exactly did re-welding that gain you? I think I'm missing something somewhere.
Got a picture? Increasing the angle is what I meant.
Been a while since I hung out here, but I still have a unhealthy obsession with my Intermediates, even bought one to be a wheeler a couple years...
I've done two intermediates using CJ7 Slaves and Masters, cheap from rock auto. Way more reliable than the factory cable setup in my Dad's 72,...
Re: I'm finally getting to it... 72 CJ5 frame boxing and other nonsensical modificati All done wiring the dash except for the wipers and the...
Re: I'm finally getting to it... 72 CJ5 frame boxing and other nonsensical modificati So progress pictures. As she sits. [IMG] crappy...
Re: I'm finally getting to it... 72 CJ5 frame boxing and other nonsensical modificati So I have ignored this thread long enough. The whole...
I know the roll is rubber but some of the boat trailer ones have a PVC inner sleeve. I am concerned that the PVC will carry too much vibration...
yep That'd be what I'm after. can't seem to find one with a 1/2 inch inner diameter though. atleast on 4wp.
Getting ready to make some custom height body mounts. What are the cool kids using for material these days? I've looked at the boat rollers but...
Separate names with a comma.