Hey there everyone, I've been away from my jeeps and this board for awhile. Got my s--t together and am beginning a new project. I have aquired a...
I used a nice set-up from a YJ wrangler I found in a nearby junkyard. Get the whole thing, under dash/column mounting brackets, pedals, and...
I've had success finding TJ pedals here in the junkyards. They work well, and are a bolt-on for use with GM steering columns. I used a nice one...
Thanks guys, I've got a correct plate, so I think I'll yank 'er out & replace. If I had not cleaned and painted the engine compartment I would...
I vote Resto mod as well. Mild lift, some good aggressive tires, 11" brakes, saginaw steering, an Overdrive if it does not have one. Don't go...
Hello Ryan, Seems to me there are a few subjects to follow here. The first that comes to mind is the popularity of the farmers-ranchers buying up...
Hello, Happy holidays to all, I am in the preliminary thought gathering process of another Jeep project and could use some input. I have a very...
Hey all and happy holidays. I recently had a F134 built to replace the old one (frozen) in my CJ3b. All was well, got the rebuilt engine all...
I have one '67 CJ-5 with an early International Scout box heater. Real simple set-up, the box mounts up under the dash and can be easily plumbed...
I use extra long bolts on each side to 'draw' the two together. Still have to wrestle and fight & almost kill myself. Some are easier than...
Thanks Kelly, that's what I thought. Been suffering from the parts store counter help's 'deer in the headlights' glaze when I ask these...
Help me out here boys, I need to change out the engine mounting plate, so the timing gears need to come off to do this, I have a gear/pully...
One CJ2a L-head front plate for sale, cheap. Oh, It's painted a real nice Fire Engine Red. Will keep my sand paper from blowing off the work...
I think you are correct. I have the original engine over in the corner, so I'll be pulling the plate off this weekend. I checked the old engine...
Hey all, I'm in the midst of changing out my blown F134 in my 3b. Rebuilt motor cleaned and painted everything, and Have the dude dangleing...
Hey all ! I have had a CJ-2a for some time now which had 'slats' of what looks like oak screwed to the top of the hood. I thought this was...
Jeep 'RULE OF THUMB'........ Your Jeep is always worth 1/3 of what you have invested into it. Rob
Check your radiator water. if it has a little antifreeze, then an oil leak will turn the color a sickly muddy brown. Could then be head gasket....
I've been seeing them around here and northern CA in similar condition, mods for around $ 4500. Price can go up if it's very nice, big tires, and...
Yes, I've done the same 'plate' you describe on my '71 and it worked and looked great. I got a scap piece from a local shop that fabricates...
Separate names with a comma.