I'd have used the 11ga as you did. Cpl weeks back, 2x4 11ga was $5.50 a foot in Denver. 99% of my tube work is in 11ga HREW.
On the tube, Bend Tech software paid for itself quick for me by reducing wasted tube. I think I missed the thickness on your frame rails, 3/16?
Awesome thread & great work on the frame. I've been wanting to extend mine, separate the axles a bit and get a little wider at the same time....
Hi Mike!
Nah, just a bit harder to bend (I stomped on it with my size 12 until it conformed to the necessary shape :) ) I used the 3/16 only because the...
33"
Oiless compressors fear me because of the load I put on the them and my ears fear them. I scored that IR a year or so ago from Sears who had...
Thx much, this board has really grown in a good way and the folks here have taught me a lot about Jeeps. On the steel: The main 2x4, the...
nothing a hose won't squirt off.. You cannot eat off my engine :) I've thought (and keep thinking) about working up some type of inner fender...
Thanks guys. There are two pieces of 3/8" welded behind the vertical upright. One is on the upright, the other on the bumper. A 1/2" hole is...
Here's a few pics of a set of flat fenders for the '69. Tube is 11ga 1", sheeting is 1/8". Strap at the grill mounts is 3/16". Top welds are...
Haven't poked my head onto the board in awhile. Hi to those that I've never conversed with. I scored a nw hard top and had to redo the bumper...
thought you'd respond like that Mike :)
I like 'em! <----voice from the past
I'll typically use HREW rather than DOM as steel is pretty darn expensive right now. Size and thickness depend upon what your building. I use 16ga...
i use the pro-tools 105 heavy duty version and have no complaints. stand is easily made yourself, save the money. I didn't get the degree wheel,...
only other concern I'd have would be to confim the depth of the bell is compatible with the input shaft length. cheers,
yeah, I miss this place and can't get over here as often as I would like to. Looks like the board has grown, is extremely healthy and still offers...
Thanks for all the replies everyone. The 465 setup, or variation thereof, looks like it'll work just fine for the 420 as well. Thanks for posting...
Hi all - I finally got around to installing the twinsticks I picked up from Nickmil (what a year and a half ago?) and need to come up with a...
Separate names with a comma.