Looks like for their 60th anniversary, Bestop is running a limited production of white, tan, and blue tops. Should be great for a resto!! See...
I bought the kit in late July. It was delivered in early August. I primed, painted and clearcoated the pieces, and let it dry for a few weeks....
Installation report: Currie JJ front LCAs Hey guys This is a cut & paste from my post at JeepForum and Wrangler forum. I thought some of you...
Ever since I installed the 3" lift (at 15K miles) on the LJ, I've had some minor shakes between 48 and 54 mph. My lift consisted of springs,...
Some of you may be familiar with Jeff Scherb from JeepForum or CJ8.com He's an excellent designer, and his hobby is making Jeep mods from...
Not unique to TJ/LJ, factory door pin bushings tend to get boogered up, frequently need lubed, and sometimes stick to the door pin. I just...
I read about this somewhere previously, can't find it on the search. Rancho 9000XLs on my LJ, 3 years old. Carrying a heavy load last week,...
Well guys I got an email from a member here who has grenaded the D18 sitting behind a T18-1B, (reverse over and up). The question is... what...
Here's some guidelines if anyone wants to make one of these clocks: What you need: CJ speedometer Sawsall or good hacksaw Files or dremmel...
Well I got the CJ running much better now. Saturday I started it, it ran crappy at first. I warmed it up, then pulled the air cleaner. As I was...
Sunday I started the CJ. It started... ran as rough as when I started it last (NOV? ) I applied the Magic Box. I forgot to take pics :(...
Some time back someone asked for pics of the seat bracket I made to mount my SuperSeats. Here are a few pics, you can see the 1x1 square, flats...
Saturday I started checking all of the wiring on the coil circuit because I kept blowing the 30A fuse. I did find a suspicious area. A soldered...
It's bad enough when you have to call your wife to come get you because the Jeep quit. It's really bad when she picks you up, you go home to get...
To recap...I had narrowed down my intermittent miss/shutting down to either carb or electrical. I replaced the cap and rotor and coil, got a carb...
FYI NAPA part number is 2-5478. Price today is $24.09 Just picked one up a few minutes ago :)
Well the CJ seemed to be running OK on Saturday, but I was suspicious about what felt like hesitation... I thought I had that worked out. I got...
Saturday I finally had a couple hours to work on the CJ. I started it, it still had the miss. Cleaned and checked the right bank plug wires,...
Seems to be a recurring problem over the past few years. This time... Engine was running well, smoothly in Tioga. Brought it home all still...
Some time back, Wheelie (Dave) had mentioned that his spare tire carrier mount doubles as fluid storage, holds maybe 2 or 3 pints of his Jeep's...
Separate names with a comma.