Thank you! It's in the process of finishing up an engine swap now.
My early jeep quitter project. I still have the old flat fender though! [ATTACH]
We have one at work. It's not the greatest... But I would buy it for 80 bucks. Good score!
Stock 2a with the ports moved. A 14 inch electric puller fan.
I'm working on wiring in my electric fan and I would to put in a buzzer that buzzes when the fan is off. I was going to use a Cole Hersee 4099...
Finally got this one mostly finished up. [IMG] Sitting atop one of my favorite places , with fender flares. [IMG] Still needs some...
Sorry for losing most of the pictures here is the like to the Facebook album with all them in it....
Novak conversions may have some information on these transmission, I remember reading about them on their site.
I plan on keeping pretty close to original, I'm painting the tank and such, a dark metallic green. If I could get it to start
Hauled this thing home last Sunday. [IMG] '73 Aeramacchi/Harley 125cc two stroke. Seemed like a decent bike for me to cut my teeth on.
It looks like the bump stops that were on my '73. it could have been added on at some point.
Side Projects, My $500 XJ, going to have a 3.5" lift and 31 inch tall tires and most all the brake lines, exhaust and other goodies replaced...
I agree
I fixed it. Had a bad connection somewhere in the line. Holds about 14 volts when running.
Installed the Delco 12 Si and wired it up as recomended by thousands of threads on the internet, but I have a problem. At initial start up the...
Howdy folks!!! Still chugging along. Added a really important pice of sheet metal [IMG] Painted the windshield satin black [IMG]...
Well, it been awhile. Been busy with it though. When I was installing the corners I noticed how bad the wheel wells where so I cut them out...
The truck transmission should have a longer input shaft(I'm assuming it came from a six cylinder) Than your current transmission. But I could be...
Thanks! That should do it.
I have a Rochester 2g with an automatic choke on my Flatty and I'm not sure how to hook up the choke. I think it might have been hooked up to a...
Separate names with a comma.