I would just measure for the size of the bolt that you need once you get the old ones off. I put a bit of a lift on mine when I built it, and that...
I also got mine from Willys overland, They were a dream to deal with and I set the body on my frame and it it lined up perfect. I wouldn't do it...
I have a 74 with an ashtray but its at my mother in laws where I keep it. I can get you a pic if someone else doesn't have one. Probably a week...
I used the Energy Suspension kit. It was great and has been holding up with all the crap I put my rig through.
I git lucky because he had one there that someone had purchased, drilled a few holes in it for the top and seats, and then decided to give it...
I got my tub from willys overland. The guy was great to deal with and the tub fit right on and everything lined up. It was a no hassle great fit.
I did it to mine. I had a T14 and broke that and then put in a T15 and then swapped that out for a T18. I didn't have to get anything extra....
I used the Energy Suspension ones for my 74 and have had no issues.
Old school chevy blazer lines work too.
I have an ARB in the front and rear and I love it. Yes it is hard to turn if they are engaged (as I do forget it on every now and then), but a...
Only reason I suggested this is I had lower than normal oil pressure and installed the midplate by melling along with a new spring and gears and...
You could check the tolerance in the pump gears.
In my 74, I am running a box out of a Durango. If you do a google search you will find it but I am also running a 98 Wrangler 4.0L and I am using...
Hello everyone, I am currently in the need of a new oil pan for the AMC 360 in my Jeep. I am having a hard time finding one. I would just like a...
Get a fan out of a ford contour or mercury mystique. It is a dual fan with lots of pulling power and fits a cj rad to a tee. Just make sure you...
Can you send a pic so I can see if I have one.
It is up to you but for less than half the price you can go with what Johneyboy mentioned. It is from an 81 cj7 with the 4 cyl 151 cidL4 (GM...
It could be due to the rust that the nut portion on the seat frame has broken off and is just spinning.
Yes, mine has a plug over it too and I am a 74
Mine are bolted to the body, they are not tied into the frame. They are 3/16th thick. Here is a shot of them before they were powder coated. I...
Separate names with a comma.