Did you run a compression check. It might reveal a some info like a blown head gasket?
What oil are you using? I had the same thing happen with synthetic oil. synchros were too slippery. I used GL-4 to resolve the problem.
What oil are you using? As crazy as it sounds I had simular problems with the synchronizer with GL5, I put GL4 in and problems went away.
Ya, I think the shocks were Gabriel Shocks that Gary recommended and they are not adjustable but work good so far he charged $25.00 each. U-bolts...
After 10 year of jarring my teeth with Rancho Springs, I ordered, and put on a set of Holbrooks last June. The price with shocks delivered was...
I put a T-18 behind a 225 with 4.27 gear and am very happy with this combo. The reason I choose the T-18 was the shortest overall length and the...
Best to give them a call and ask them why for sure before putting down the money and time spent the t-14 may have different issues then my t-18....
I put one in with a 225 and a t-18 and it is really close to the exhaust. I called Novak and they told me they did not support this set up for...
I found one at the Hardware store
I am in California and had the rubber on 3 of those accelerator pumps disintegrate in a year and a half from carb kits from my regular FLAPS and...
I don't know if this is helpful but I had the same problem after I rebuilt my 225. I had the machine shop put in hardened exhaust seats while...
Thank you for the replies. I removed the front dust cover and pushed the clutch fork all the way in while running with no changes.
My t-18 is making a high piched noise. This is a rebuilt trans I put in along with a 225 about a year and a half ago to replace a f-head and t-90....
I have this set up, the exhaust guy complained but got it to fit. Its tight but have not had any problems.
I got a kit from Herm (Luk) that went with my Ford T18 to Dauntless. Although I needed a longer pivot pin and a different, longer throwout bearing...
I put leather, heated seats form a 94 Jaguar, it's cats meow. [IMG]
I used 3 u-joints and a pillow block. to move the steering shaft out of the way. [IMG]
When I had my heads done I had the machine shop put hardened seats in but they didn't check there work and I ended up with a variance in the...
If you have time you could shop e-bay. I don't see any now but I picked up the bracket for $40 plus shipping this summer.
Sounds interesting! Please sign me up too.
Separate names with a comma.