You guys are my HERO's Thanks!!!
Ok I finally found a flanged axle 44 for my 66. I pulled the axles out and am trying to find the bearings but not having much luck talked to...
Might add I was staying at Estes park 8,000 ft then went to black hill SD, 3-7,000 ft. The Jeep did fine in these lower elevations.
I took my 66 cj5 to the Rockies last summer. The guys here helped a lot do some searching for mntbuggy and you can find the links. Mine is a v6...
He didn't say they were not. I did some more digging and found http://www.detroitvintagewheels.com/home.html. They have ones like mine in...
I have always liked these, thought about replacing them with something else but I will keep these one will show up sooner or later. ( I hope)
I sent him an E-mail and he did not have any but would e-mail me if he gets any. Thanks for the help with the name Jackman. I did a quick...
I have looked in the past and never been able to find a name. Since these were made in the 70's there were not that many making alum wheels....
Thanks for the info for the repair. I have looked on E-bay off and on for many years :-) with no luck. Keep looking though
Yes the wheels are really cast aluminum , Just polished !!! It has "made in the USA' and '15 x 7.5' cast on the inner bead. The spokes...
I have had this set of Aluminum Spoke wheels on my jeep for probably close to 25 yrs. I bought them used then. One of them has had a crack in...
When i was rebuilding my engine (225 V6) i had the heads rebuilt. Chances are the valve guides are worn due to normal use. The shop i used was...
Mine was pretty rusty too. I found another Jeep that had a nice tub on it. I switched the tub/ body out and sold the donor jeep drive train with...
Thanks for the compliments it was a lot of fun. Amazing how many people commented on the jeep when it was parked. The short day trips are fun in...
Thanks to all for the recommendations for timing and jet setting for my 1966 Jeep (225 v6). We put the jeep on a trailer behind the RV headed...
Might try Allstate carb. Just google them. They have some nos stock and also provide parts or rebuild. I have bought some parts and have had...
Re: Rebuilt 225 in the jeep and now looking for jetting at higher altitude for Color That's the one good thing about a bright orange jeep...
Re: Rebuilt 225 in the jeep and now looking for jetting at higher altitude for Color Thanks
Re: Rebuilt 225 in the jeep and now looking for jetting at higher altitude for Color Added it to my favorites thanks!!
Re: Rebuilt 225 in the jeep and now looking for jetting at higher altitude for Color THanks
Separate names with a comma.