My reman parts store steering box has developed some play and my pitman arm developed a bend on last years Colorado trip. Since im seriously...
My old 1st gen toyota tacoma has finally died. It has over 300k miles on the clock and needs an engine rebuild and at this millage the rest of the...
Im going to be installing a gm tbi kit soon and the ecm needs its own coolant temp sensor. I was originally thinking of putting the ecm sensor in...
Im looking for a 2g to tbi adapter plate. The only company i could find that makes one is howell but they won't sell it unless you buy the whole...
I was trying to bolt up my dana 18 to a sm465 im going to be installing into my jeep and i ran into a little issue. The t case twin stick shift...
My current speedometer driven gear is a 16 tooth with the part number sw448856. From reading old posts it looks like i would need a 15 tooth...
Im having a trouble figuring out why my gas gauge only read half full when topped off and empty with 5 gallon still in the tank. I have a late...
So im still haveing problems getting the clutch to work. Its a LUK brand and the first time i installed it i put the friction disk in...
I thought dana 27 spindles would work with a full float conversion with the back side machined to fit the dana 44 tapered housing but the 27...
Do the dana 44s on 1970 jeepsters have a centered or offset differential? I found one for cheap but befor i drive over an hour to look at it i...
I installed a dana 30 last weekend and when I was test fitting the tie rod I noticed that it hit the shock at just before full steering lock. So...
i found a narrow track dana 30 out of a '80 CJ that im thinking of buying. it is only the housing and spindles. can i use a carrier out of any...
i have a brand new bestop bikini top and the part that slids into the windsheild channel is too wide to fit my windsheild. i figure that i might...
i got a pull type clutch slave cylinder in the mail today. while measuring to find out how to mount it to my T14 i noticed that one of the raised...
i finally got around to installing the powerlok i bought from a member awhile back. its for a dana 44 tapered rear axle. when i was trying to set...
for those who are looking for inside the frame headers for the dauntless, the advance adapters headers do fit. the passenger side will need a...
what is this thing above the exhaust ports on my 225 heads? the closest thing in that part of the head i can find in my manual is for the smog...
i finally got my trans and t-case out to start overhauling them. when i got them seperated and started taking off the e-brake i found that where...
has anyone tryed drilling out the wheel stud holes in the drum so the drum can be pulled off with out removing the hub? both drums are shot so i...
im almost ready to start reassembly of my dana 27 rebuild. all i have is a chilton manual and its more usefull leveling my workbench than giving...
Separate names with a comma.