My wife's TJ was in need of a input shaft seal on the steering box. This is well in good until I tried to find a seal kit. Come to find out an 06'...
I just aquired a new to me spare 225 with a casting number of 1381623. The other link does nothing for me so I will have to try and search for...
Wow your tranny and T-case are really clean:p I will be trying this maybe this winter so this was a big help.
I'm running 34" x 9.50" TSL's with a 3 inch lift and I get a little rubbing at full turn but other than that it is fine. Although I am running a...
Bob, I have used an NLGI #2 in gearboxes on brush hog mowers and it works much better than 85w gear oil. But in steering knuckles or JEEP...
:iagree: Good point didn't notice that right away. Could be an Aussie thing so we wouldn't understand.:D
The body mods are very unique. The grill and hood and windshield look right though. Looks neat though. The front fenders are just neat.
:iagree:
I run between 170-190 in the summer and 160-175 in the cooler months. I also run a pusher fan and not the stock fan.
:iagree::uwop:
Check the tech section and the resources section. And the bolt pattern is a 5 on 5.5 as you stated. Sounds like you have a good start. Got any pics?
We just clean out our shop and there are some small bearings which might fit. What is the part #? It is worth a shot.
Re: CJ 5 ride hight after replacing springs looks good. When I lifted my JEEP with a 3" lift and stock shackles it lifted her 5.75" to begin...
Well I guess there are some others. We have local shops here that have very good quality stuff but you will pay the price. But you do get what you...
Some of the suppliers we use at work are: www.fastenal.com, Fastenal supply www.mcmaster.com, McMaster Carr www.grainger.com, Grainger...
This is great. I am experiencing some of the same symptoms but I have narrowed it down to my rear drive shaft is worn out at the dust seal and the...
Looks like a great start. Good luck and keep the pics coming.
Do you mean the ring gear? or the one on the actual starter? If it is the ring gear here is a possibility...
I agree with looking in junkyards for the fill cap. I doubt you could go to the FLAPS and find one but try a 1975 Buick Apollo. They had a 231 but...
You should not have any major problems doing what you speak of. If the tub is good then go with it.R)
Separate names with a comma.