the 360 runs real good,plus it has an edelbrock cam,carb and 4 bareel intake. plan on wheelin the R)hell out of it!!
sold my 75 cj and picked up a 79 cj7.just got it done and on the road.heres some pics and some specs. amc 360 with hei conversion,t150 dana...
is the bleeder clogged?? ive seen this more than once.take the bleeder all the way out and see if the small hole at the base is clogged.if its...
only wanted to change transmissions so i could use the d300 transfer case that i have.wanted the slightly lower low range the d300 has over the d20
Just bought a 79 cj7,i want to upgrade the stock t-15 trans to a 4-speed. any ideas what trans will bolt to an amc 360 and a dana 300 without to...
yep, mine leans to the left,if you are standing behind it.it used to bug me but,its a jeep thing.
crap.do they make a lower ratio gearset for the dana 20??
will a dana 300 from a 1980 cj7 bolt to a t15 out of a 75 cj5? what kind of problems will i run into?im not sure if the input/output shafts are...
i just put a minispool in the rear of my jeep,,and when i originally put it back together it seemed to be binding pretty bad. i had to cut about...
thanks guys,thats exactly what i was looking for,ill let u know what i find .thanks againR)
i looked in the archives to see if anybody had any frame measurements for a 75 cj5.i know my frame is bent somewhere but not sure where. my wheel...
we just put wagoneer axles amc20 d44 in a 89 wrangler.worked out very well.u can clearly see that amc 20 in a waggy has much heavier axle tubes...
from what ive read the monty box,is 3.75 turns lock to lock,not sure about the jeep box.got everything hooked up tonite but couldnt drive it...
Ok im sure this has been discussed a thousand times ,but here goes. im putting power steering on my 75 cj5 and i bought another jeep,(80 cj7)for...
im looking to buy tires ,but im not sure what to get.ive been looking at 34 X 10.5x15 super swamper ltb.anyone ever had these and if so how were...
exactly i have 2.25 inch down pipes into a 2.5 inch muffler with a 2.5 inch tail seems to work well
very dificult to do.i just put exhaust on my 75 cj5 and i was going to try that but didnt think i could do it.i have an amc 360 with flow tech...
off the subject,sort of ,i built a demo car a couple pf years ago (78 dodge st regis)and to get the rear of the car higher we flipped the rear...
the throw out bearing could be coming apart. thats why when you rest your foot on it it ,it gets quieter.could be a place to start
an easy wat to tell if its rings or headgasket would be to do a block test,it checks for hydrocarbons in the coolant.you can buy a test kit at...
Separate names with a comma.