4l60e 4 speed auto
basically i got the engine,transmission and transfercase for 5hundy. the engine was rebuilt 10000 miles ago, and the whole package has about...
currently the engine is a 74 304. the jeep is wired with a painless wiring harness for (i think) the 76 and newer jeeps. i swapped in a gm...
hey guys im wanting to swap a 96 4.3 out of an s10 into my cj. i did get the harness but man their is alot going on there. im thinking of buying...
can i use the input gear out of the xj tcase? now you guys have me thinking..... does anyone have a better idea? my jeep has the 304 and t14...
thanks for all the info guys!!
thanks for the info! i have done engine and drivetrain swaps before, i have even swapped the tbi from a 4.3 gm v6 onto a buick 3.8 v6. it...
i agree that it seems odd that i cannot find any xj's. ive owned one and it seems like everyone i know has as well. its probably because i am...
hey guys, i hope this is the correct area for this post if not just move it. i have a 74 cj6 that i am wanting to swap a fuel injected 4.0...
thanks guys, i really just didnt know if their was something available that was better, or easier. jeep
honestly i have no problem doing all of the wiring and installing of sensors and what little fuel line will need to be done. hell i went to the...
hey guys im sure this has been discussed several times but after searching threads i really couldnt find much on the subject. so my question is...
hey guys ive got a 74 cj5 with a front dana 30 and drum brakes. aside from swapping discs from a newer dana 30 or buying a 600 dollar kit...
thanks
hey guys ive got a 304 in a 74 cj. it has an edlebrock intake, other than that it is stock. i had a 500 cfm edelbrock on it but it spit and...
thanks guys. i did buy a mityvac and bled and bled and bled some more. i am going to try one more time and then switch to the dot 3. any...
sorry guys my internet has been down for a couple of days. i really appreciate all of the responses and ideas. i did adjust the rear drums....
hey guys ive got a 73 cj5 i am putting back together. all the brake components are new. i have bled the system a few times but still dont seem...
how much clearance should their be between the rod and master cylinder. thanks again jeep
mcgilla--- the article in the technical library does not say a master cylinder for discs is required. i originally installed exactly like the...
Separate names with a comma.