I recently had a dizzy gear failure while warming up several weeks ago. Didn’t think much of it as it was a used delco that I used for a...
I’ve attempted to search and I can find new build info on the external balancing of the cranks and flywheels on 401 motors. My question is, will...
Ok, I was digging through stacks and stacks of old paperwork of my fathers and came across a copy of the title to a 71 Renegade II that my folks...
Does anyone know what the factory ink/paint stamps were to indicate. I have 2 Baja yellow R2's and one has a "525" stamp on the radiator cowl and...
I was finishing off the new wiring harness install and went to hook up the reverse light switch and pulled the pan and found this!! It's a good...
Through a friend of a friend kinda thing. I scored a running oddfire 231 (no smoke, no real huge leaks, no funny noises and good oil pressure with...
I'm going to start the rebuild with the best of the two I own first. I have put a 2 year goal without a minimum dollar cap on what needs to be...
This jeep has had a tow bar on it most of its life and only owning it for the last couple of years I don't know a lot of the mechanical history...
Is $100 a fair deal ??? I managed to drag up a rough, cracked and welded and 71 frame, d44 flanged axle and grenaded d27 with 4.88s and v6...
I have been in need of replacing the driver side rear wheel bearing in my 69 as it had a 1/2" of slop in it. When I tore it down and removed the...
This last weekend I purchased a 69' CJ that has a Detroit in the rear D44. On the trip home, due to circumstance of a flat tire and flat spare I...
Its a 69' with 225 headers, with a Motorcraft 2100 swap, T-14/D18 with OD, 4.88's Detroit locker in the rear, D27 front with a power lock. And a...
Separate names with a comma.