hey all. i got 68 frame, dauntless engine, and i'm about to put in t-90. my question of the day is which tranny mount do i use. i've seen 2...
:iagree: thats exactly what i did. put a reinforcement above each spring hanger. the frame is supposed to flex a little and it cant if the hole...
thats a long list of specs, you should look into getting a fsm. here are most the main ones. main bearing cap: 80-110 connecting rod caps:...
i have also ran into this same problem, drilling was a real pain. very easy to tear up the aluminum if its not drilled perfect. i didn't have a...
:iagree:, i like this guys thinking.
also remember all tires brands are not the same width. i'm running a super swamper 33 10.50's on my tj and they are about 8 inches tread width. i...
i have since replaced those bolts on mine, but i used what looks like a 7/16 to me, coarse thread. mine are 1 inch long, and i have a lock washer...
you got that given to you?!?! that thing is a gem! looks like a great project. good luck:beer:
tuxedo's came out in "61, you may have a later tux body on your jeep though. thats my guess.
yea, don't waste money on a gallon. ask me how i know:roll:. i think its a great product. i advise to use the degreaser and the the acid. those...
hard to give you an easy solution. pics and drivetrain info would greatly help. i'm going out on a limb here but, have you or the previous owner...
hey that looks pretty interesting, if i can still use stock linkage and such i might try it. gotta go do some research. thanks:beer:
so i figured i'd check out my master cylinder while i was bored today. it came out of a '68 with a v6. so i thought it was dual reservoir. i was...
i dunno, krage's just told me about the gasket not being big enough. i would guess everything else should be the same. i hope anyhow:roll:.i have...
i bought my steering box rebuild kit from krage's. haven't installed it yet but the gasket they supply is for the 4 cyl only. i had contacted them...
i agree, something different on the trail is cool. but an all original cj6 going down the road is cooler in my opinion. tranny rebuild kits are...
my question is why are you trying to do all this swapping? your profile says you jeep is a '66 cj6 with a v6 and stock running gear. not many of...
i bought a rebuild kit for about $430, heads rebuilt at machine shop for $200, kept it pretty inexpensive. till i got the headers:)
during my rebuild i had the same problem, i had a chewed up 16t and the replacement was a 15t. i also had bought a new 1st/ rev gear, but i put it...
don't know if this helps but the t-90 has an oil collector in the front of the case for the countershaft. the tranny does not technically need...
Separate names with a comma.