Years ago there were half round rubber flares and they sold coils of the same rubber flares, don't know if they still make this??? These 7...
As an add note I do have a wide track 30, but now that would go the other way...to wide??? I like the narrowness for maneuvering around in the...
They do make flares for the 2-3A-B, I think 4WD sells them, it is what I am using on my 2A Dale
I changed to a 30 just for that reason, to steer sharper...it turned out the wheel back spacing has more to do than axle width. I didn't want to...
I had a DR Mercury 70 h.p. 6cyl. outboard (DR meaning direct reversing) the start button was on the bottom side of the throttle lever, the neutral...
If you do a lot of brush work or down stick/trees you will find these guards worth it. Or at least a help on how to protect for that kind of...
My biggest issue was length, my wheel base has been stretched to 86" (if I had to do it over I might go to 90"). So to keep the rear driveshaft as...
I don't have the cam specs in hand but it's a comp cam hyd. roller rather mild (the tech. guy wanted me to up it but I said it's a jeep and will...
just for added info, I put all the numbers in to come up with this set-up! I wanted to double my low range gearing and still have good street...
I was just going to suggest what jeepdaddy2000 said, I did go with a 30 but had 16x8 rims that had 4" backspace...rubbed worse than before! I used...
Jeep, the only true American sports car!...I forget who said that?...some guy from Italy.!? When they invented the jeep they didn't care about...
Please buy the universal/CJ manual you can find them in most Jeep acc. catalogs! worth every cent!!! the Jeep Bible is another good one too, look...
Remember that those shocks are at a 45 degree angle so that means they only do half the work of an straight up/down shock and use half (+/-) the...
So if you buy a die grinder new gaskets and tear down the engine so you can port match everything...you can feel good about...getting...uhh...I...
Lots of stuff here...back in the day (1972) there wasn't anywhere near the stuff available today!!! The only springs I could find were J.C.Whitney...
I should explain, both roll-overs were on dirt and paved roads at speeds that defied the laws of gravity. I figured that if it was...
The roll bar needs to be just taller than you noggin and if you roll it would be wise to have a front hoop (cage and connected with bars) I also...
I did the wedge AND tie rod flip for the same reasons. so far (3 yrs.) I am pleased with the results! Just do it right! Dale
I had the same issues with my clutch I went to Ansen hanging pedals (1980) and converted my brakes at the same time to a dual master with the...
Over the years when I was asked if this will fit/work, I would say...yes, it will work (and this is what they wanted hear, "yes") all it will take...
Separate names with a comma.