I am in need of some pictures of steering linkage, Column to Box (saginaw up front) on a Dauntless equipped CJ. Not alot of room to get a straight...
I have a question about steering linkage lengths on the different axles. I am going about upgrading my steering on the 69 CJ5. Im getting rid of...
What is a good source for early Cj5 Steering Wheels, new after market etc. I was thinking about getting a smaller one. What do you guys have?
I believe I am going to replace/upgrade my steering. I was looking at all the Saginaw boxes, this one in particular,...
What ideas do you guys have. Seems my Steering Column may have the threads bunged up for the nut that holds down the steering wheel. Could be the...
Ok, Who can advise where the Oil Temp Sending unit SHOULD be located on the block of a 225 Dauntless. Thanks
Hey all, I have a stock (I believe) starter on my 1969 225 Dauntless, it has the solenoid on the side. I have tried to get this thing fired up...
Ive been cruising the wiring threads for a bit on here. Does anyone have handy a diagram of what wire goes where on a stock 69 CJ 225 headlight...
Anyone have the Torque values for the flywheel bolts on a 225 V-6, and the clutch to flywheel bolts? Thx
I tried removing the pilot bearing from my 225 engine via the (packing grease method) and it didnt budge. Any ideas? All help is appreciated.
I decided to pull the fiberglass tub off my 69. My goal is to clean up some of the drive train and frame etc. It looks like this Jeep had an...
Hey all, I was hoping somebody can give me a pointer or two. I am removing the steering column and wondered how it pulls from the gear box? Does...
Hello all. I am new to CJ's and just picked up a 69 CJ with the 225 v6 and 3 speed. It needs a Clutch and I am planning to do it. Any hints or...
Separate names with a comma.