I know the 7120 head is the best for the 4.0 liter conversion, but I'm seeing some 0630 heads advertised as HO heads . Are these as good as the...
Timgr...I guess I asked the wrong question....I do have the original iron 72 intake and carb, but what I was looking for was what newer intake...
I know this has been talked about before, but I just have a question or two. I have a 75 258 that I am going to put a 4.0 head on, a 7120. I know...
timgr.....orig enging/trans was a 232/3speed...which I still have....72 tub was shot so I picked up a 75 tub...then later the 258 combo...right...
Sounds like I might be better off keeping the 258, doing some mods to it....something to think about. Thanks for the feedback..:)
I have a 75 258 w/a t18 attached...also have a spare 304. My question is, will the bell housing and tranny fit the 304, or will I have to get a...
Thanks for all the replys...When I used to restore Mustangs, you were able to buy full factory assembly manuals...some were over 6 volumes...just...
Does any one know if Jeep Assembly Manuals are available? I have the FSM but looking for more info on assembly.
I'm changing from a 232/3 speed to a 258/T18. I know the 258 combo is longer than the 232 combo. Does any one know if I'll need to change the...
I ment to mention this in my reply....You mention you used a different cam and had low power..The 304 in question has a non adjustable valve...
Does your new engine still have the tag on the front of the passanger side valve cover? If it does you can tell what size engine it is plus,year...
I'm going to re-wire my 72 cj5. I'm a decent mech, but when it comes to electrical, I'm lost. But I've heard ez wiring was pretty good....I sure...
I just took my grant wheel off my 72 cj5. It is a special adapter for your set up. I'm going to use the oringinal bus wheel...I still have the...
Thanks for the info on the clutch set up....You guys are
I've been looking to put a new clutch in my 72 cj, and my 72 Jeep tech. Service manual shows 72's having a clutch cable set up. But mine is...
I need to replace the tub on my 72 cj.....body mounts rusted out. Is a 75 cj5 the same tub? If not, does anyone know what kind of mods I will need...
I've been out to my local salvage yard looking to pick up some original rims for my 72 CJ5. But it seems like they are all mixed up on different...
You are right, it does look cool...I'm going to mount mine on the side also....What size tires are you running? Do they rub on the side of the...
Thanks for the feedback....I've got a 72 Service Manual for my 72 but it dosen't even give that info...:)
Where is the proper location for the spare tire for a 72 CJ5? I have seen pictures of some mounted in the rear and some mounted on the passanger...
Separate names with a comma.