LBOGRS- Any chance you making another and selling it?
So I found that detroit diesel work boat blue is kind of close to the right color.[IMG] On the block you can see the original color and the heads...
yes, I am going to drain and replace the oil in there...been sitting a while. then take each one apart and lube and re assemble the engine....
yes, I took it out and filled it with oil, seems to have less spring in the lifter now, like it should move the rocker arm
Anyone have some info on these? The chiltons don't have much on them. One of the valves wasn't moving when the hydrolic lifter moved, the push...
So i recently had my radiator re-cored from Sanford Radiator in Sanford Maine. They guy there said it wasn't from a jeep...he claimed it was from...
my other thought is to find older dana 44 backing plates with the parking brake there, and going that route. I'm going for function ability no...
does anyone know where to find the backing plate? I think my CJ5 had this as the parking brake. I found the drum online, but no backing plate...
Got headman headers P/n: 69420 from georges jeep parts (601)542-0013 [IMG] [IMG]
Thanks for the help, I tried it all and the Pitman arm puller worked, it was a little tricky as the one side of the puller didn't have much to...
So I have the ball joints off the knuckles bu from the bell crank...not coming off, I tried using the ball joint fork tool, but no luck...actually...
I have a dana 18 on my 1970 CJ5 behind a 225V6 and a T14a. It has a single shift lever but dual secetor shafts. is it possible to make it a dual...
Thank you all for the input. This is my first real project...tear down to rolling chasis and then rebuild. I've had a 67 bronco that needed a...
where'd ya pick it up at?
I have a 70 CJ5 that I am considering doing a little bit of swaping. it currently has V6 225 with a T86 and spicer 18 with 4.88 ring and pinion...
Re: Where's My VIN? (New VIN Project, Please Help Out) VIN #: Under hood: 8305017363115 2. Month/Year of manufacture from dash tag? 11/69 3....
Must be a perch then. You have described it perfectly. Also the picture shows exactly that peice.
so I have a 1969, and have found that it has the 225v6, a limited slip dana 44 rear axel, and it has 31" tires and it doesn't look like it has any...
Thanks. Big help, now to decide which one to go with :)
Does anyone know what the original colors for 1970 would have been?Any pics?
Separate names with a comma.