Seems like going with the 400 is the popular choice. From what I've read, the TH400/Dana 20 combo from any Jeep, including the Wagoneers and...
I found the HP info from a number of different places, but most recently from www.442.com http://www.442.com/oldsfaq/oftrn.htm#Transmissions...
I've read the TH400 weighs 15lbs more and uses 45 HP to operate versus 30 for the TH350. In other words, if I use the TH350, I gain about 15 HP...
I'm switching my 3-speed Jeepster Commando to an Auto. Can't decide on a TH400 or a TH350. I have the 225 V6. I've read that the TH400 takes 45...
I twisted off the threaded end on one of my rear upper shock mounts. I'd rather not cut the whole mount off and weld on a new one. My...
I have no big preference betweeen the TH350 or 400. I understand that the 350 (stock) will give slightly better accelaration because it's more...
Re: parts needed to switdh to auto trans I definitely will keep the 225, but I am having second thoughts about the TH400. I planned on that...
Re: parts needed to switdh to auto trans Would this save me any steps in locating parts (such as the flex plate)? It's a Buick 231 with a...
I was thinking of using an old metal Garden sprayer to spray Ospho (phosphoric acid) into the frame followed by thinned-down enamel.
I've found at least a couple pounds of sand and dirt inside the frame of my '67 Commando (and even a mouse nest). It came from the desert of...
Kayline is not the same as Bestop, right?
Re: parts needed to switdh to auto trans Thanks Pack Rat. I've had to let a few partsters go because I have nowhere to put them and so far, I...
Can anyone list what parts would be needed to switch from the 3-speed to a TH400? I plan on using a buick transmission without the adapter....
I've gotten all the bolts attaching the body to the frame off (had to cut off 4 of the 12). Now I'm ready to remove the body. The front part...
Thanks.
Can anyone tell me if the (side-to-side and wheel-cylinder) steel brake tubes for an early CJ-5 will fit the C101 Commando? What about the...
Once again, thanks!
Actually, I guess I do have a question. The diagram that Pack Rat provided for the CJ3-6 shows only 2 "ball seats", one for each end. Mine had...
Thanks for the info
Fantastic! Thanks!
Separate names with a comma.