This is the Perkins/T90 bellhousing. [IMG] [IMG]
Not sure about the paint color but the Perkins was only offered for a few years in the early 60s so the welded on battery box lid would be correct...
I've only got the new rear springs in so far. The first impressions are good. They seem to be high quality, well built springs. They fit well...
So my new springs came about a week ago but I didn't get a chance to put them in until this past weekend. It wasn't until I had the one of the...
Major victory... last night the 5 moved under its own power for the first time since I’ve owned it! The floor isn’t in yet (no gas pedal, or...
I spent some time in the garage last night and got a lot of the electrical system fixed. When I started the only thing that worked was the...
Thanks guys. I’ll try to get some more pictures up soon. It’s not going to look very different since I’m not doing anything to the body yet. It...
I was looking around on the 503 page and it looks like I've got an early style ross box that was swapped in at some point. I check last night to...
Hey guys, I haven’t had a ton of time to work on the jeep lately (getting married in less than a month) but I have done a lot in the past few...
I was trying to wire up my horn but my steering box doesn't have the hole in the bottom of it. It's in a 62 CJ5, there is a button on the...
Yeah, it is the perkins jeep that I'm working on. I did have the old parts but the box they in was actually stolen out of my driveway along with...
I’m still trying to sort out my clutch linkage problem. Something within my bell housing is not right. I installed a brand new 9.25 inch clutch....
I don't have a pic of them assembled yet. They are 11 inch drums with the cam adjustments on the backing plate, not star wheel. I thought they...
Hey guys, Can you help me figure out what vehicle this rear brake spring is out of. My 62 CJ5 has 11 inch brakes on the back and I can't find a...
So I put the driveshaft in the CJ5 and with the transmission in gear and the clutch pedal fully depressed I can start the jeep and let it idle....
There are a set of hubs on ebay right now that look exactly like those. They are listed as Kelly Hubs. Made my Kelly MFG.Co of Charleston West...
I'll pick up some u-joints and get the shafts in later this week. Hopefully that solves the problem. Could be an interesting ride if it...
The clutch fork is seated seated properly and I did have the complete linkage and bellcrank out of the jeep. It was all cleaned up and rebuilt...
Thanks for the replys, I did make sure disc was installed correctly. And if the 1/4 inch of movement on the throwout bearing isn't enough to...
I just finished installed a new clutch (friction disc, pressure plate, throwout bearing, and clutch fork). I started the 5 up today and tried to...
Separate names with a comma.