My 73 Commando came with this setup and I need a little help figuring it out. As my 72 service manual only covers cable clutches.. [IMG] I'm...
I need to know aprox how long the intermediate steering shaft is from floor board to steering wheel hub. Thanks in advance, guys. Greg
I'm looking for a shim pack for front output shaft on my D20, and cant find one to save my life. Exhausted all the local sources I could think of,...
I have my D20 almost completely taken apart, but im stuck on the last step in the novak process. It says that early D20's have a thrust washer and...
Anyone have any tips for getting old nasty ones out? I PB Blaster-ed the heck out of em, used a tapered socket, washer and bolt to try and...
So I came across a really clean DJ5 body and front clip on Craigslist. After I went to look at it I couldn't pass it up. So the plan is to trade...
I need help sourcing a clutch for this setup. I took my existing setup to a reputable clutch shop here in Springs and they said they found a "kit"...
So I changed the rear diff fluid and resealed the cover, come to find out with the proper fluid level in the diff the pinion side leaks. The jeep...
This is my senior project as a welding major. I should have built jeep bumpers, their is alot more to building a trailer than I considered in the...
I sent the guy a message on ebay to ask if he had any more pics or info about the top. This starts the crack pipe gears turning in my head as...
So here is a little background, when I got the commando it had a leaky MC, I noticed that it pulled to the right when brakes were applied. Changed...
Anyone have one of these in their Commando? I would be interested to see better photos than the website has....
So I have some 2x4x11G tube left over from another project and I was thinking about building a set of sliders for my Commando. I have read online...
[IMG] [IMG] [IMG] [IMG] [IMG] [IMG] I'm thinking 2" of lift, 31's, bumpers and rocker rust removal probably with custom rectangular sliders.
Educate me on Later (AMC) Commandos Updated pics!!! So I have a chance to pick up a 73 Commmando, I know my Early Jeeps pretty well but my AMC...
So my dad scored me this sweet cart from his work. Free always works for me:) And I just happened to have this 2'x4' piece of 3/16... [IMG]...
So I have been accumulating build pics over the last year and a half and im finally getting around to staring this thread.. Here we go.. This...
Does anyone know where I can get one for my T98, 225 V6 combo? My local trans and clutch place doesn't have anything much smaller than an inch...
Their is a pretty deep gouge on my hub? I guess is what you would call it?? where the wheel bearings ride. Does it need to be replaced or no...
When removing the valve covers on my 225 I noticed that the passenger side cover (viewed with the jeep in front of you) had way more crud in it...
Separate names with a comma.