The flatty I just picked up is in great shape except for one little problem. When it is warmed up to running temp, (ie, been out for a drive and...
I've just completed all my swapping and got the JEEP going again. I'm running a Rochester 2G on a 231. This is the same carb I had on my 225....
So, I'm trying to get everything else I need for my headers and was going to get new gaskets. The local FLAPS book says the 64-67 225 gaskets are...
Does anyone know what the plug gap should be on a 74-75 231? I don't know what the engine came from originally to check. Thanks
I'm in the process of swapping engines in my 63' As it turns out my new engine is a 231 instead of a 225. Everything so far has been the same...
At LBL a couple weeks ago I developed a miss at the end of the day. I thought it sounded and felt like it was missing on one cylinder. I have...
What is the desired plug gap for a ECJ 225?
I was wondering if anyone knew of a place to find some stock looking LED tail lights for an early CJ5. I have been to a FLAPS and a local farm...
What should the initial and total timing be for a 225? I didn't find much searching and don't have a manual handy.
Has anyone ever rebuilt the bottom of a Willys tailgatge. I'm mainly talking about the solid rod that has flat sides and fits into the female...
It is a 16 with 6.50 width tire on it. It was free so I can't complain. The guy had 3 spares and gave me the oddball one. I know the other two...
I am needing to replace the 4cyl radiator I have with a :v6: radiator. I have one but need to re-locate the battery in the process. My JEEP has...
I am looking for a new seal/gasket that goes between my hood and the top of my grill. I looked around in a few parts catalogs and haven't found...
I am going to change the timing chain and gears soon and realized it wouldn't take much to throw a new cam in while I'm in there. I'd like to...
On the ECJ5, did the 4cyl models have a diff. shroud from the grill back to the radiator than the V6 models. I am trying to find a diff. radiator...
I need to replace my timing chain/gears. Anyone have a brand that has worked well for them? Edelbrock runs $48 from Summit with Cloyes running...
Does anyone have any experience with a roll cage/bar and a half cab at the same time. I am getting ready to put my cab back on and have been...
Here was my days work. This little guy took forever b/c of so many small angled pieces. I know how everyone enjoys pics. party on The day was...
I wonder is my overheating problem could be due to a cracked/blown head gasket? It has a new 180* thermostat, new radiator cap, new water pump,...
Just a little poll to see what everyone's 225 normally runs at for temp. Mine doesn't seem to stay very consistant. I know that outside temp and...
Separate names with a comma.