Do these clutches fit our jeeps? late 60s? Heck of a deal...
I picked up this 58 Fc last weekend from a local auction/ scrap cleanup. I wanted one for atleast 20 years since I first saw some at a junk yard...
I picked up a winch today i think its a ramsey but has no markings. Has a prestolite mbj4408 motor. I think im going to have to mount it on a 45...
Is this a tux plate light? Im pretty sure thats where i got it years ago but from what i can see on google they look a little longer and chrome.
Both my jeeps make noise in the higher gears of low range my 67 in low range 3rd gear forget about it sounds like its eating itself. the faster...
I built this rear fender storage box to hold my recovery stuff chains straps and stuff. First i made sure it was going to be back far enough from...
I thought this tool looked pretty interesting. It wouldnt get used very much for 50 bucks but would be nice to have around [MEDIA]
Would I do any harm by installing a heater hose shutoff valve on my V6 like the F heads have? Normally I pull off the hoses at the core and...
Iv been reading David Vizard's book on modifying A-series engines and they have an integrated manifold like the L head. He determines this is a...
So I decided to do something about the anemic heater in my 67. I pulled off the core cover removed the baffle and the vent tube. I popped the spot...
I made these plans for the hardtop door hardware if you need to make some. Should work on Kelly and Meyers tops. If you know of others feel free...
Im trying to figure out if this is a Jeep part or not. I cant remember exactly where i got it. Possibly a willys wagon or pickup or 2a. its for a...
How do I test the generator out of the jeep? I know it works because it worked in the jeep before i put in an alternator. but I only get 1.5v and...
I just got a power-lock from the rear dana 27 of a 63 scout. I think its 10 spline i didnt count. Will this work in the front dana 27 of my 67...
Iv started on my mini Jeep. This will be 1/3 scale. I started with a power wheels grille and found the harbor freight 99cc engine fits behind it...
Its something iv wanted to do since i built the jeep a few years ago. I only drive it on the road with the hardtop on year round so with 4...
Its from a t-90 and has no casting #s by the bolts like normal so i wire wheeled it a bit and found the F mark but its not script so i dont know...
Are the dana 41 carrier bearing shims the same as the 44? Part #s are different but the bearings are the same. And nobody thinks the 44 shims are...
How do i get the pin out that holds the shifters on? i took out the zerk fitting and the set screw. do i just hammer it out with a nail from the...
I know the flattys are different but are all the windshield latches on cj-5s the same from the early 50s - 70s ?
Separate names with a comma.