Thanks Nickmil, that is exactly the info I was looking for.
I just purchased a new (to me) set of diffs. As a result, I will need to switch my dana 18 to a dana 20. My question is, do I need an adapter kit...
I went through a similar seach recently, here's the link to the previous discussion:...
I think that is pretty fair considering the location and that they come as a pair.
PM sent. Can you post this on the global user library on SolidWorks?
Cool! I have SolidWorks 2005, is it an assembly or a solid part? Either way, I would love to have a copy.
I'd stick with 31x10.5, wider and you will likely hit the frame on tight turns. I like the look of the MTR's.
What program are you using? If you don't mind sending me a copy of your model I could definately use it and would really appreciate it. George
I would look at the extent of the rust before I used POR, simply because this is a structural safety support. If the rust/pitting is too deep,...
http://www.willysjeepparts.com/Spring_Attaching_Parts.htm as a stock replacement.
http://www.willysjeepparts.com/Spring_Attaching_Parts.htm ...all the way at the bottom.
I sandblasted then used a Marhyde self-etching primer followed by a rustoleum coat in flat black. The self-etching primer is probably not...
I had a similar problem with my 1.5" YJ superlift springs. I don't know if it was the springs or flex in the body, as I didn't notice it right...
There is a really good list of venders in this months JP magazine.
There are a set on ebay, they turn up from time to time.
I found a shop in Yuma that sells rebuilt diffs to customer spec, with all the mods I want for a moderately decent price. The nice thing is that...
That would be Kaiser Willys, the bulk of the cost is the rebuild kit, however it looks like they are over charging for the spider/side gears, at...
Separate names with a comma.