Has anybody done stock wrangler springs spring under?
Okay I got a front dana 44 along with T15 and dana20 from a scout II for doing some favors. What should I do? I hear a lot of negative about...
Wouldn't be cool to be able to replace your stock crossmember easily and gain a couple inches of clearance and add some beef? Budbuilt builds...
Does the short motor mount go on drivers side or passenger side? Man, I'm glad they are only tacked in. I got the crossmember bolted into the...
Will Dana 27 axles work in a 25 housing? How about the hubs and other parts? Aren't Dana 27 ring gears actually smaller than 25's? My 25 has the...
Should I keep my T90 and get riding or should I take a few months to save and do a granny gear 4 speed swap? I rebuilt my T90 not long ago. I...
Not what I wanted to see. Does that look like a crack in the #3 cylinder wall? [IMG] :eek: [IMG]
Just got home with this 71' A little rougher than I hoped so I got it cheap. All I know is Dana 18's and T90's. What are these? I can tell they...
Has anybody had any experience with these motors? I've got one I was thinking about swapping into the flatty. Are they the same as the Buick?
Who all has done the dauntless swap in their flatfender? I'm considering losing the Lhead.
I need a coil for the L head. I got an electronic distributor and meant to order the coil at the same time. I think it needs a new one. What coil...
I really want to do the pertronix on the L-head. Where is the best place to buy the kit? There is alot of different information out there.
I'm not much of a thread builder so here's the short and skinny. I got sick of messing with the CJ-3a starter. The stars had to be perfectly...
Here's the problems... Valve stuck, bent or otherwise fubar. 3 cylinders on a 60 hp 4 cylinder doesn't get you far. I hate this bs CJ3a one...
Okay I need your guys help. I'm going to look at what appears to be a really nice garage kept Renegade for cheap. It is a 79 or 80. Is there...
I'm building some rails for the Jeep. What has everybody done to attach them to the frame? I was thinking I was going to weld them on but now I'm...
I will probably have to add a longer steering stop bolt in order to keep the lugs from the swampers catching on the leaf springs. I swear it got...
My rear spring shackles stayed locked backwards for most of the ride Saturday. They are the same length as the originals. Would making them 1"...
The piece on the left fell out with the cap. Its a piece of rusty sheet metal. What is it and where does it go? Does everybodies old L heads look...
Pulled the cover off the rear and nothing but water came out. Seeing as the Jeep hasnt seen water in at least 6 years this was looking bad. I...
Separate names with a comma.