Hier nog een late reaktie...... De kruisstukjes in de voorste aandrijfas zijn soms kleiner als de standaard "1310" kruisjes. Ik heb er bij mijn...
Hey Sander, hoe gaat het met de restauratie? Grtzz van nog een Nederlander hier :-)
Put the highjack in the D-ring, it works fine. I say, angel it! ;)
It's good to see progress again :beer:
If you need specific Nekaf parts, drop me a mail for Nekaf parts resellers in the Netherlands.
Nekaf means Nederlandse Kaiser Fabrieken i.o.w. Dutch Kaiser Frazier factory..... -link- It's a regular M38a1, the're quite common around...
Made something like this......... [IMG]
[IMG]
You should measure the ohms of the sending units, than you know if the gauges are different.......
Repaced it, runs fine. Thanx!
Today, took the 5 for a drive around. Got home, backed-up on the driveway, suddenly the engine dies. First I thought, I'dd ran out of fuel (fuel...
Still building, or wheelin'? :)
Nice :)
Nice one! Thanx [IMG]
:uwop:
This?
'68 also....think it's called the "Lost Years" I found different u-joints in front an rear driveshafts, 1 1/18" bellcrank instead off 7/8"
The yellow one comes from The Netherlands, these licences plates are typical Dutch oldtimer plates. [IMG]
Found them at 4wd.com, it's a Crown number:643055 -klik-
Did this last week. My disk could not be fitted the other way around, it just won't fit, there's not enough space on the flywheel. Flat side to...
Separate names with a comma.