Sliders installed !!! [IMG] [IMG] I tried to jack the Cherokee, there is a slight deflection in the 2x2, however I don't really mind. it...
Hi all Some progress on the XJ. I made a ACAD drawing of some rock sliders I wanted, I had them built and tonight was the install. Now they are...
Not to highjack, but that little red sand CJ-5 in this month JP had an auto IIRC. Might be worth it to look at the specs of that CJ. My 2 cents
Here is the last one [IMG]
Done !!! Hi all. I'm on vacation, and I promise my wife that by the end of the day the jeep will be finished. Rocker protection will have to...
Welcome aboard ! Lots of good info and helpfull people here, you are at the right place here.
couple more [IMG] [IMG] Now I'm going on vacation in New-York for the weekend, next update will be later next week
Hi all Body paint is now done, next the frame and wheels Lots of masking on the dash [IMG] Interior of tub and dash done [IMG]...
Make sure that you have a very clean surface to start with, and you should be ok
Or look here. I filled bigger hole than that with good results. Message #2 http://www.earlycj5.com/forums/showthread.php?t=57384
However there was some excess of paint in a couple of places. Once it is dry, I'll sand the whole jeep and give it a last coat [IMG] And...
Hi all More progress tonight, painted the rest of the jeep. [IMG] [IMG] Here is the hole below the door, I think it came out pretty...
Sunny day ? Don't be fooled. I was out to cut the grass and there came....some rain !
Ok, some more done today I did put some regular Bondo over the defect still visible after the coat or primer, and while the front end of the...
Ok, more progress tonight First, that hole again bellow the door. I sanded it as smooth as I could (with an orbital sander, paper 120 grits)...
I spray from the cans, the one applied with a brush will be for the floor. And why don't I remove wipper arms ? Out of laziness I admit...:roll:
More progress yesterday This is the tool I use to sand the excess of fiberglass. You have to gently apply pressure, otherwise it eats very fast...
I roll the interior of the tub, and I spray the rest. That ``recipe`` for body repair gave me some great results last year on my YJ [IMG] [IMG]
This is the stuff I use for big holes and repairs. Dries fast and hard, and sticks pretty whell to metal [IMG] Front fender and door damage...
Hi all I finally decided a color for the jeep. Until this morning I was going to go with a regular white for the body, and gloss black for the...
Separate names with a comma.