I'm wondering what the stock manual choke bracket looks like on a 225 V6. This is the static bracket that holds the cable sheath in place as the...
I've recently acquired a NIB Kayline top for my ECJ5. It's mostly complete but it's missing some of the small installation parts and the...
Is there anybody out there making tube fenders? I'm looking for a set for a 69 CJ5. I originally posted this in the "fabricators forum" but didn't...
Is there anyone out there making tube fenders that will fit an early 69 CJ5? I'm in the market and haven't found anything... Thanks
I would very much like to convert the clutch in my 69 CJ5 225/T14 to hydraulic. I know Novak makes the parts to install the slave but what are you...
I'm trying to reseal an old Ramsey 200 PTO winch. I'm disassembled to the point where the main gear housing is open and the gears need to be...
I just picked up a set of axles and for the condition they were in on the outside I was very surprised to find lockers that look to have never...
So I recently acquired an older 8274 that was partially disassembled. The end plate has three parts as pictured and was obviously altered by a...
OK so I have a 69 CJ 5 That steered great at high speeds with the original Dana 27 frong axle. I recently rebuilt a 1972 Dana 30 and swapped it...
So here's the question. I am upgrading my Dana 30 to disc brakes but the later model dana 30 disc brake knuckle assemblies I have use the 5 bolt...
I wasn't able to find answers to a couple of my questions after searching the old threads on this forum so I have a few questions. It looks like...
Separate names with a comma.