My searching hasn't turned up anything useful really. I am going to build a 3/16" steel skid for the '74 CJ trans/txfr case using the factory...
I'm trying to make it to the Rubicon trip this year in July. My Jeep is already lifted about 2.5", on 33's, T18, 360, and has lockers. Must have's...
My resolution is posted down the thread a bit...here is my original question: So I have a GM column with the bell connection to the power gear...
As a follow up to my axle tube cracking thread. I've finally been able to remove the axle and will start repairs soon. As I looked into the TSM...
While I was inspecting my Jeep the other day I noticed a small crack in the axle tube. No fluid is coming out yet on that side (the other side is...
So while I was replacing my intake manifold I noticed (by looking down the intake ports) that the valves were caked with carbon. What is a good...
So, I bit the bullet and purchased a Hamilton Fuel Injection for the 'ol 360. I'm really happy with it both in quality, instructions, and overall...
Zila and Johneyboy...I know at least you two have AFI on your rigs. The only bad comments I can see about them is sometimes the Tech support...
So I had a problem with the original rear Dana 44 that is causing me to install new wheel bearings and seals. The National A10 bearings came with...
After a trail ride that involved some deep water crossing, enough to submerge the alternator on the 360, I was wondering about how well a standard...
Went wheeling this last weekend. Kept having MC2100 carb issues with stalling, hard starts and vapor lock...all of which I attribute to heat since...
I still have a slight wobble in the front end, here's the specs. Original Dana 30, newer bearings (Timken) and ball joints (Spicer), have a...
The only thing I've ever found online is "gluing" a homemade piece of steel to the oil pan with silicone caulk. I'm leery of this due to heat...
Quick background...I was out running errands, Jeep was at operating temp and otherwise running well. I came out of a store, got to the road and...
So I'm going to be installing a new 3" Black Diamond spring set. I currently have 1" lift shackles and want to go back to stock shackle length. I...
So when I rebuilt my 8274 I bought a contactor instead of replacing with solenoids. I bought the Superwinch brand from Summit Racing... [IMG]...
So I was able to pick up a new Ected e-locker for a Dana 44 30 spline, 3.73 and down, for $450. I guy in the local club bought it new, never...
Picked this up today, its an '06. Has a soft top and bikini top also. Interior is like new, only has 56K miles. I like everything about...except...
So I purchased an aluminum radiator and wanted to ask the collective about grounding it. I could install it just like the OEM copper core,...
So I'm on a short trip right now. Took the freeway, speeds up to 65 for a little over an hour. Got off my exit and when I came to a stop the Jeep...
Separate names with a comma.